[pageLogInLogOut]

#Associations

NCTO statement on signing of Phase One Deal on 301 tariffs

The National Council of Textile Organizations (NCTO), representing the full spectrum of U.S. textiles from fiber though finished sewn products, released the following statement on the Phase One Deal on 301 tariffs signed today by the U.S. and China.

“While we are still studying the details of the deal signed today, we applaud the administration for finally pressing China for a more rational and equal trade relationship,” said NCTO President and CEO Kim Glas. “Our industry has been severely damaged by China’s predatory practices over the past 30 years and we are anxious to see a new era of sound trade principles and balanced trade.

At the same time, we question the last-in, first-out approach to the tariff reductions. In our sector, this means that the penalty 301 tariffs on finished apparel and sewn products–the areas where tariffs have the most potential to effect reforms in China while bolstering the Western Hemisphere supply chain– are cut in half while U.S. manufacturers continue to face full tariffs on certain inputs and equipment not available domestically.”

For more information on NCTO’s position on the Section 301 China tariffs, please see here:

NCTO Comments on the Administration’s Announced Phase One Deal on 301 Tariffs December 13, 2019

http://www.ncto.org/ncto-comments-on-the-administrations-announced-phase-one-deal-on-301-tariffs/

NCTO Welcomes Administration’s Inclusion of Finished Apparel Textile Products on China Tariff List August 13, 2019

http://www.ncto.org/ncto-welcomes-administrations-inclusion-of-finished-apparel-textile-products-on-china-tariff-list/

NCTO President CEO Kim Glas Testifies at U.S. Trade Representative’s Hearing on Proposed 301 Tariff List June 20, 2019

http://www.ncto.org/ncto-president-ceo-kim-glas-testifies-at-u-s-trade-representatives-hearing-on-proposed-301-tariff-list/


NCTO is a Washington, DC-based trade association that represents domestic textile manufacturers, including artificial and synthetic filament and fiber producers.

  • U.S. employment in the textile supply chain was 594,147 in 2018.
  • The value of shipments for U.S. textiles and apparel was $76.8 billion in 2018.
  • U.S. exports of fiber, textiles and apparel were $30.1 billion in 2018.
  • Capital expenditures for textile and apparel production totaled $2.0 billion in 2017, the last year for which data is available.


More News from TEXDATA International

#ITM 2026

ITM 2026: The new geography of textile production

New production hubs are emerging across North Africa and Central Asia, while Türkiye is accelerating its transformation toward higher-value, technology-driven and more sustainable textile manufacturing.

#Research & Development

“Production is a product”

From technical textiles and AI-driven robotics to the limitations of textile circularity: Professor Dr Thomas Gries looks back on more than two decades of development at ITA Aachen. In the interview, he explains why production technology remains a decisive success factor, discusses international collaborations and innovation ecosystems, and shares his views on the transformation of production landscapes and the challenges facing an increasingly regulated industry.

#Knitting & Hosiery

“We need to move away from the price trap and return to a value-driven mindset.”

With its new Textile Innovation Center, KARL MAYER is sending a strong signal for innovation, collaboration, and the future of textile applications. In this interview, Karl Josef Mayer discusses new opportunities in warp knitting, the processing of staple fibres, recycling, the changing role of machinery manufacturers, and why the textile industry must once again focus more strongly on the value of textiles. by Oliver Schmidt

#Associations

“Innovation, resilience and international experience remain the great strengths of the Swiss textile machinery industry”

Geopolitical uncertainty, growing competitive pressure from China, new free trade agreements and the shift towards a circular economy are currently reshaping the global textile industry. In this interview, Cornelia Buchwalder discusses the current mood within the Swiss textile machinery sector, the industry’s distinctive innovative strength, new market opportunities in India and Asia, and the technological trends that could shape the upcoming trade fair cycle leading up to ITMA 2027.

More News on Associations

#ITMA 2027

Get into pole position for ITMA 2027: German technology delegations open for pre-registration

International textile manufacturers can now pre-register for the Global Textile Technology Mission, taking place in Germany from 12 to 17 September 2027. Four thematic technology routes will provide selected participants with first-hand insights into leading German textile machinery manufacturers and research institutes ahead of ITMA 2027 in Hanover. The deadline for expressions of interest is 11 December 2026.

#India ITME 2026

New momentum for British textile machinery in India

The British Textile Machinery Association (BTMA) is looking to India ITME 2026 as a major opportunity to strengthen industrial partnerships and mutually expand exports, following the introduction of the UK-India Free Trade Agreement and the formation of the UK-India Textile Machinery Coalition (UKITMC).

#Associations

China and India: Different market dynamics create opportunities for Swiss textile machinery

Ahead of ITMA Asia + CITME in Shanghai and India ITME in Greater Noida, Swiss Textile Machinery highlights the contrasting industrial structures, investment priorities and technological requirements of two of the world's most important textile manufacturing markets.

#Associations

European and Canadian textile associations call for stronger transatlantic cooperation

Ahead of the EU–Canada Summit in Montréal on 29–30 October 2026, EURATEX, the Canadian Textile Industry Association (CTIA) and the Canadian Apparel Federation (CAF) have issued a joint statement calling for closer industrial cooperation, improved implementation of the CETA trade agreement and stronger partnerships in innovation, sustainability and advanced textile technologies.

Latest News

#Weaving

unspun and Arvind partner to bring 3D weaving into industrial-scale apparel production

US fashion technology company unspun and Indian textile manufacturer Arvind Limited have announced a strategic partnership to introduce OneWeave™ 3D weaving technology into industrial-scale apparel manufacturing. Two machines are expected to become operational at Arvind’s Ahmedabad facility by December 2026, with plans for a potential expansion involving more than 30 additional machines across India and North America in 2027 and 2028.

#Dyeing, Drying, Finishing

Nine Orthopac RXVMC-20 systems: Y.R.C. Textile relies on Mahlo for uncompromising fabric quality

In 2026, Y.R.C. Textile invested in nine Mahlo Orthopac RXVMC-20 straightening systems, a clear vote of confidence in technology engineered for textiles with high distortion dynamics and the tightest quality demands.

#Natural Fibers

Better Cotton Initiative partners with FarmRaise to simplify data management for US cotton growers

The Better Cotton Initiative (BCI) has announced a partnership with agricultural technology company FarmRaise to simplify data collection, reporting and program participation for cotton growers in the United States. The digital platform will help farmers manage certification requirements, document agricultural practices and track progress towards regenerative agriculture goals while reducing administrative work. The solution is scheduled to become available in January 2027.

#Research & Development

ITA spin-off TERNAfil wins third place at KUER.NRW 2026 with MAXCarbon technology

The Aachen-based ITA spin-off TERNAfil GmbH has secured third place in the KUER.NRW Business Plan Competition 2026 with MAXCarbon, an innovative carbon-ceramic hybrid fibre developed for applications in the hydrogen economy. The technology combines the mechanical properties of carbon fibres with the thermal and corrosion resistance of ceramic materials.

TOP