#Sustainability

2022-11-17

ECO PASSPORT by OEKO-TEX® for inks by Durst

Durst is pleased to announce that their P5 Sublifix sublimation inks, are now ECO PASSPORT by OEKO-TEX® certified.

This ink certification completes the overall sustainable package of the P5 TEX iSUB printer, whose breakthrough drying and sublimation concept already enables a massive reduction in energy consumption.

OEKO-TEX® ECO PASSPORT is an independent certification system for chemicals, colorants and auxiliaries used in the textile and leather industry. During a multistep process, each individual ingredient in the chemical product has been analyzed to meet the statutory requirements. Certified products are safe to human and environmental health, can be used for ecologically responsible textile production and are listed on the OEKO-TEX® Buying Guide (OEKO-TEX® Buying Guide).

OEKO-TEX® STANDARD 100 compliance of the sublimation inks has always been very important to DURST, this now available independent confirmation by ECO PASSPORT of the P5 Sublifix Inks further confirms their efforts and responsibility to anchor impact reduction as a central argument in their customers' production chains.

Additionally, this certification enables the customers an accelerated and cost-optimized certification process of both, their production chain according to OEKO-TEX® STeP, as well as their final products according to OEKO-TEX® STANDARD 100.

Thus, obtaining the ECO PASSPORT certificate for the P5 Sublifix Inks also results in an immediate economic advantage for all customers using these inks.

Durst Como is born

The Durst Group, a leading manufacturer of digital printing and production technologies, is setting another milestone in the digital textile industry: the merger with Aleph SrL is entering its final phase. With legal completion expected by the end of 2025, Aleph will be fully integrated into the Durst Group, and Durst Como will emerge as a new center of excellence for digital textile printing.

Textile Exchange unveils agenda for 2026 conference in Vancouver

Textile Exchange has released the agenda for its 2026 Conference, which will take place from October 12–16 in Vancouver, Canada. Under the theme “The Implementation Era,” the event will focus on translating sustainability commitments into practical action and scaling solutions across businesses, supply systems, and landscapes.

Textile PRO Forum calls for greater harmonisation of textile EPR systems across Europe

The Textile PRO Forum has published a new analysis highlighting the need for greater harmonisation of textile Extended Producer Responsibility systems across Europe. The document, Toward harmonised Textile EPR Systems in Europe: analysis and recommendations, presents the results of work carried out by Workstream 1 of the Textile PRO Forum, led by Dr. Eng. Viola Corbellini, Strategic Development and Innovation Expert at Erion Textiles, and Eng. Luca Campadello, General Director at Erion Textiles. The workstream focused on reducing administrative burden for textile producers by identifying areas where procedures could be better aligned across countries.

Results of the 38th ITMF Global Textile Industry Survey

The global textile industry appears to be turning a corner, but this is more likely a fragile and possibly temporary improvement than the start of a durable recovery. According to the 38th ITMF Global Textile Industry Survey, conducted worldwide during the second half of May 2026, business sentiment, order intake, order backlogs and capacity utilization all improved versus March — yet every indicator remains weak by historical standards, and rising costs cast doubt on how long the upturn can last.

Closing the Footwear Loop reveals challenges and opportunities for circular footwear

The footwear industry faces one of the most complex circularity challenges in the fashion sector. A new Phase 1 report from the Fashion for Good initiative Closing the Footwear Loop, developed together with Circle Economy, provides new insights into the composition, condition and recycling potential of post-consumer footwear waste.

Object Carpet tests production of rPET BCF yarn on Neumag BCF line

In a joint project with Object Carpet GmbH, Denkendorf; the Institute for Textile Technology (ITA), Augsburg; and Next Generation Recyclingmaschinen GmbH (NGR), Feldkirchen, Austria, Barmag investigated the processing of recycled polyester for BCF yarn. The goal was to evaluate the fundamental suitability of 100% recycled carpet material for reuse in carpet yarn production to create a closed-loop system in carpet manufacturing. To date, commercial rPET BCF processes have been based solely on rPET from bottle pellets.

MEL Composites supports ELA Aviation with advanced composite materials

MEL Composites is supplying advanced composite materials and process consumables to ELA Aviation for the production of its next-generation gyroplanes. The collaboration underlines MEL Composites’ growing role in advanced aerospace mobility, providing lightweight materials designed to improve aircraft performance, manufacturing efficiency and structural reliability.

Yarns and technologies in symbiosis: Biella Yarn presents Fall/Winter 2027/2028 collection “New Romance_”

Biella Yarn, the flat knitting brand of Suedwolle Group, launches new Fall/Winter 2027/2028 collection, inspired by the symbiosis of yarns and technologies – elements that blend, adapt and evolve together, forming something new without losing their origin. The name “Neu Romance_” reflects the emotional and neurological dimension of the yarns: a connection that engages the senses, experienced through material, touch and interaction. The collection is further brought to life through design collaborations, featuring selected yarns used in different design approaches.