[pageLogInLogOut]

#Natural Fibers

Fashion For Good launches “Beyond50 Denim” to address hemp integration barriers in global denim production

Fashion for Good, together with leading global brands BESTSELLER, C&A, PDS Limited, Reformation, and Target, launched Beyond50 Denim: Combining Cottonised Hemp and Green Chemistry, a project accelerating the use of hemp as an alternative to conventional cotton in denim. By combining two pioneering innovations (SEFF’s Nano-Pulse™ cottonised hemp fibres and FIBRE52™’s proprietary chemistry formulations with soft handfeel), the project seeks to demonstrate that hemp-based denim can match or even surpass cotton in both performance and appeal.
© 2025 Fashion for Good
© 2025 Fashion for Good


The global denim market is projected to surpass USD 115 billion by 2029¹, yet its growth is tied to conventionally cultivated cotton – a fibre which carries a considerable environmental burden. While cotton is valued for its inherent softness and cost-effectiveness, the conventional methods of its cultivation are notably resource-intensive. These often involve substantial water and pesticide inputs, contributing to a heavy global environmental footprint and social impact across the entire production chain. Such impacts raise pressing concerns about the fibre’s long-term sustainability.

Although hemp may offer a more climate-resilient alternative, requiring fewer resources and improving soil health, its integration into denim has been limited. Typically, total hemp content in denim does not exceed 20%, due to challenges in achieving the desired handfeel and aesthetic criteria demanded by consumers. This limitation can necessitate a challenging trade-off across performance, price, and environmental impact parameters. These factors have collectively contributed to the limited adoption of hemp as a mainstream fibre in denim.

To address these challenges, Fashion for Good has launched the “Beyond50 Denim: Combining Cottonised Hemp and Green Chemistry” project, bringing together brands BESTSELLER, C&A, Reformation, PDS Limited, and Target, innovators SEFF and FIBRE52™, and manufacturers Bossa (Turkey) and Nice Denim (Bangladesh).

“Our goal at Reformation is to help drive the kind of innovative solutions that have the potential to transform fashion. Beyond50 Denim is a chance to really put promising solutions like hemp and green chemistry to the test: to learn, validate, and hopefully help open the door for a more sustainable future for denim.” Carrie Freiman Parry, Senior Director of Sustainability at Reformation.

The project will validate the synergistic integration of two innovations: SEFF’s Nano-Pulse™ technology transforms raw hemp into refined, cotton-like fibres that are easier to spin and integrate into fabrics, while FIBRE52™’s unique chemistry solution can impart a softer handfeel to cellulosic fibre-based fabrics.

“Hemp’s limited adoption in denim production reveals how entrenched industry practices can systematically prevent transformative innovations from reaching their potential”, says Katrin Ley, Managing Director at Fashion for Good. “With Beyond50 Denim, we aim to demonstrate that overcoming these barriers requires more than isolated technological advances. By strategically combining breakthrough fibre technology with green chemistry, the project shows how different innovations can work together to tackle long-standing challenges in the denim industry.”

By combining these two innovative technologies, the project aims to validate how hemp content can exceed 20% and reach 50% and beyond in denim applications while maintaining performance parity with conventional cotton. Through this approach, the project seeks to demonstrate that hemp can meet or surpass the functional and aesthetic benchmarks established by cotton, while simultaneously offering a more sustainable alternative for the denim industry.

Learn more about the project at this link:

https://www.fashionforgood.com/case-study/beyond-50-cottonised-hemp/


¹ Research and Markets. (2024). Denim Jeans Market Outlook, 2029.



More News from Fashion for Good

#Recycling / Circular Economy

Solving the Feedstock Gap: Unlocking Post-consumer Feedstocks for Textile-to-Textile Recycling in Europe

Fashion for Good launches Project FAE (Feedstock Activation Europe) to develop the sorting and pre-processing infrastructure needed to channel non-rewearable post-consumer textiles into textile-to-textile (T2T) recycling at scale. The project is a practical response to one of the most pressing problems in textile circularity: making post-consumer waste a viable, commercially competitive raw material for recyclers.

#Raw Materials

Fashion for Good mobilises industry to adopt mass balance attribution and accelerate decarbonisation

Fashion for Good launches today the Mass Balance Demonstrator project, a collaborative industry initiative to implement and scale the mass balance attribution (MBA) chain-of-custody model for biomass-attributed PET in textile applications. The project represents a concrete step toward accelerating brand-driven decarbonisation across the apparel value chain.

#Recycled Fibers

Advancing the future of stretch: Fashion for Good launches new project to validate bio-based and recycled elastane

Launched today, Stretching Circularity is a collaborative project initiated by Fashion for Good dedicated to accelerating the adoption of lower-impact elastane alternatives that are compatible with circular textile systems. By validating bio-based and recycled elastane solutions through pilot-scale testing and demonstrator garments, the initiative aims to remove one of the most significant technical barriers to a circular textile economy.

#Recycling / Circular Economy

Fashion for Good releases open-source blueprint for near-net-zero textile manufacturing

Fashion for Good launches the first open-source blueprint for near-net-zero textile manufacturing, tackling one of fashion’s biggest emissions hotspots. Developed under the Future Forward Factory project, the blueprint offers Tier 2 manufacturers in India five practical, financially viable pathways to reduce carbon emissions by up to 93%.

More News on Natural Fibers

#Raw Materials

New study shows low environmental impact by Cotton made in Africa Organic Cotton from Tanzania

Today, the Aid by Trade Foundation (AbTF) is announcing the results of a comprehensive life-cycle analysis (LCA) for cotton produced in Tanzania under the Cotton made in Africa Organic (CmiA Organic) standard. The study emphasises the small ecological footprint of CmiA Organic verified cotton. This can largely be traced back to the absence of synthetic pesticides, artificial fertilisers, and artificial irrigation. Consequently, CmiA Organic cotton can help the textile industry meet regulatory requirements as well as science-based targets. The results also show that the consequences of climate change threaten the livelihoods of these cotton farmers, even though the type of agriculture they practise barely contributes to climate change.

#Raw Materials

Better Cotton Initiative strengthens regenerative focus in standard update

The Better Cotton Initiative (BCI) has strengthened the regenerative focus of its field-level standard with the launch of a new version of its Principles & Criteria (P&C), which marks the next step in the organisation’s journey to becoming a regenerative standards system.

#Natural Fibers

Global Standard gGmbH launches second public consultation for GRTS Draft 2 for the textile industry (1–30 April 2026)

Global Standard gGmbH is pleased to announce the release of Draft 2 of the Global Responsible Textile Standard (GRTS) for its second public consultation. The consultation will be open from 1 April 2026 to 30 April 2026, inviting stakeholders across the textile and apparel value chain to provide input and contribute to the further development of this new Standard.

#Raw Materials

Global production expected to decline in 2026/27 as policy shifts and weak demand reshape trade

Early projections for the 2026/27 season indicate that global cotton lint production will decline by 4% to 24.9 million tonnes, while world consumption is expected to remain stable at approximately 25 million tonnes, according to the April 2026 issue of Cotton This Month.

Latest News

#Techtextil 2026

SAHM Winding Solutions and Vandewiele Automation present integrated automation solution for winding processes

For the first time at the Techtextil trade fair in Frankfurt am Main, Germany (21 - 26 April), SAHM Winding Solutions (Hallo 12.0. / Booth 95) and Vandewiele Automation will be showcasing their combined automation expertise for industrial winding processes. Under the motto “Combining Automation. Maximizing Flow”, the two companies will demonstrate how automated package handling and robot-assisted yarn knotting can be integrated into a continuous production flow.

#Recycled Fibers

UNIFI celebrates recycled and circular Innovation with ninth annual REPREVE® Champions of Sustainability Awards

Unifi, Inc. (NYSE: UFI), the makers of REPREVE® and one of the world’s leading innovators in recycled and synthetic yarns, today announced the winners of its ninth annual REPREVE Champions of Sustainability Awards, recognizing brands and mills that are advancing circularity and responsible manufacturing across the global textile industry.

#Man-Made Fibers

Teijin Frontier announces new Stretch Polyester yarn offering exceptional compatibility with high-performance Polyester materials

Teijin Frontier Co., Ltd. announced today that it has developed a new stretch polyester yarn that offers new opportunities to create comfortable, all- polyester fabrics for sports and outdoor wear. The new polyester yarn demonstrates exceptional compatibility with high-performance polyester materials. Further, Teijin Frontier’s proprietary polymer design and spinning technology impart excellent elasticity to the new yarn. In turn, this yarn adds stretchability and recovery to the advanced functionality and excellent texture of high-performance polyester materials.

#Man-Made Fibers

Lenzing commissions 14 MW power‑to‑heat facility, strengthening grid stability and heat management

The Lenzing Group has successfully commissioned a new power‑to‑heat (P2H) facility with an electrical capacity of 14 megawatts. The installation converts renewable electricity directly into process heat, is fully integrated into the existing heat network at the industrial site, and represents a key building block for a fossil‑free heat supply. As project partner, VERBUND was responsible for the energy‑market integration and will operate the facility for balancing energy marketing, enabling it to respond flexibly to short‑term fluctuations in the power grid.

TOP