[pageLogInLogOut]

#Sustainability

Changes regarding exception rules for the use of fibres and materials

As part of the meta-label approach, the Green Button defines requirements for production processes at selected supply chain levels. Companies demonstrate these through recognised certification labels. Alongside the requirements for corporate due diligence processes, they are the basis for a product to be labeled with the Green Button.

In the Guidance to the list of approved fibres and materials it is defined for which fibres and materials recognised certification labels are required, which quantity limits apply, if any, and which fibres and materials may only be used under specific exception rules and which evidence has to be provided for these exceptions. The mentioned guidance is an extension of the list of approved fibres and materials.?Based on the exchange with our stakeholders, the scheme owner, the Federal Ministry for Economic Cooperation and Development (BMZ), has decided on the following changes regarding the requirements for fibre and material use to make the implementation of the Green Button 2.0 requirements more feasible.

These changes take effect with the adaptation of the standard. However, we would like to point out again at this point that alternatively, products can continue to be awarded according to the production requirements of Green Button 1.0 until 31.07.2024.

The following changes are to be implemented:

1. Extension of the general exception rule for the use of virgin man-made fibres from artificial polymers (70/30 - rule)

Normally, certified recycled fibres should be used in the Green Button 2.0. Since this is not always possible, we have formulated exceptions that allow the use of virgin man-made fibres, such as the 70/30 rule.

What is new is that this 70/30 rule is now not only triggered by using at least 70% recycled fibres, but also by cotton and regenerated fibres with a recognised certification label. So now it is possible to use up to 30% virgin man-made fibres for textiles that consist of 70% sustainable cotton, regenerated fibres and/or recycled fibres with a recognised certification label each, as long as their use is generally allowed in the Green Button.

Special regulations apply to virgin polyester and elastane, and newly also to elastolefin, i.e. elastolefin may now also be used up to a maximum of 10%, yet without certification. 

2. Inclusion of an exception rule for polyamide

Polyamide is currently only permitted with a recognised certification label, i.e. recycled. It is planned to allow the use of virgin polyamide also in exceptional cases, namely for protective clothing in accordance with EU Regulation 2016/425. Evidence is to be provided via the CE marking on the product. 

3. Evidence of exception regarding personal protective equipment (PPE)

In the area of PPE, the form of evidence is to change.

Thus, it is no longer mandatory to provide evidence in the form of individual, function-related standards (ISO/EN) in order to claim exceptions for certain fibres and materials. In future, the CE marking on the product in accordance with EU Regulation 2016/425 can be used as evidence for exception for PPE.

Exceptions for PPE apply to the use of the following fibres and materials: aramid, carbon fibres, modacrylic (MAC), (new) virgin polyester and (new) polyamide.




4. Evidence for exception rules for industrial laundry suitability - virgin polyester

Virgin polyester may only be used in exceptional cases. In addition to the 70:30 rule, we therefore have defined selected business and application areas. For exceptions regarding home and contract textiles, that are suitable for industrial laundry, as well as workwear, we have now updated the forms of evidence, that are to be provided. There will be the additional option of submitting a self-declaration as evidence of the industrial laundry suitability of textiles.

The Green Button secretariat will provide a respective template, which will be accessible via the online portal.

In addition, in the workwear sector, both a reference to ISO 15797 on the product and the Pro-Label (ISO 30023) can be used as proof.

5. Further exception rules for the use of virgin polyester

Furthermore, an exception regarding virgin polyester can in future be applied to surgical clothing and drapes via DIN EN 13795-1 and 2. Here, proof of conformity will be provided in accordance with DIN EN 13795-1 and -2.

A further exemption rule will also be introduced for PPE in accordance with EU Regulation 2016/425.



More News from TEXDATA International

#Recycling / Circular Economy

textile.4U publishes special edition “Top 100 Textile Recycling Companies 2025”

With a comprehensive 176-page special edition, textile.4U is dedicating its latest issue entirely to one of the most dynamic and influential topics in today’s textile industry: textile recycling. The new issue, published exclusively in high-quality print, presents the Top 100 textile recycling companies researched and selected by TexData – organizations that already play a key role in the transition to circular textiles or are expected to have a significant impact in the near future.

#Recycling / Circular Economy

Responsible Textile Recovery Act of 2024 signed by Governor

Senator Josh Newman (D-Fullerton) is proud to announce that Senate Bill 707 (SB 707), the Responsible Textile Recovery Act of 2024, has been signed into law by the Governor of California, Gavin Newsom. This groundbreaking legislation establishes the country’s first Extended Producer Responsibility (EPR) textile recycling program, marking a significant step forward in the state’s efforts to combat waste and promote sustainability.

#Textiles & Apparel / Garment

Modtissimo promotes sustainability with 28 coordinates in the Green Circle

Modtissimo is proving more and more to be a textile and clothing show that delivers the latest innovations in the area of sustainability, with the iTechStyle Green Circle being the main showcase for companies' creations. In this 60+4 edition, taking place on 12 and 13 September, 28 coordinates will be exhibited in a section organised by CITEVE and curated by Paulo Gomes.

#Europe

The EU and Egypt team up to mobilise private sector investments at Investment Conference and sign a Memorandum of Understanding underpinning €1 billion in macro-financial assistance for Egypt

At the EU-Egypt Investment Conference, co-organised by the EU and the Government of Egypt on 29-30 June, the EU and Egypt are teaming up to intensify private sector investments in Egypt. They are also signing a Memorandum of Understanding (MoU) for the disbursement to Egypt of up to €1 billion in Macro-Financial Assistance.

More News on Sustainability

#Sustainability

VAUDE eliminates PFAS from all products

PFAS (per- and polyfluoroalkyl substances) are now detectable worldwide – in drinking water, soil and the human body. These so-called “forever chemicals” are considered hazardous to health and potentially carcinogenic, as they do not break down and remain in the environment permanently. Despite these risks, PFAS are still used in a wide range of products. More than 15 years ago, VAUDE made a strategic decision to gradually eliminate PFAS from all product categories.

#Sustainability

OEKO-TEX® chooses TextileGenesis to advance digital traceability for organic cotton

OEKO-TEX® today announced a full collaboration with TextileGenesis, a Lectra company, to digitally trace and authenticate organic cotton, strengthening fraud prevention across the supply chain. This announcement follows a successful pilot and brings together OEKO-TEX®’s certification expertise and closed testing system with TextileGenesis’ digital traceability platform to deliver a secure, end-to-end solution for managing certified organic cotton flows.

#Europe

ICAC to support European Commission on pending PEF legislation

The International Cotton Advisory Committee (ICAC) is proud to announce that it has been included as a member of the European Commission’s Technical Advisory Board (TAB) on the Product Environmental Footprint methodology. The Commission developed the Product Environmental Footprint (PEF) to assess and communicate the life cycle environmental performance of products and organizations.

#Nonwovens

ENDURANCE Program: Driving operational sustainability at Magnera

As Magnera enters a new year, the company is reflecting on a key sustainability milestone from 2025: the launch of ENDURANCE, its global, employee-led initiative focused on waste reduction and sustainable innovation. Launched on Earth Day 2025, this initiative has generated more than 250 improvement submissions from team members across Magnera’s global operations, demonstrating strong engagement and shared accountability for sustainability across the organization.

Latest News

#Knitting & Hosiery

The new RE 6 EL from KARL MAYER shows what it can do

KARL MAYER’s new RE 6 EL from KARL MAYER brings a breath of fresh air to raschel fabric production. The latest samples from the textile product development department of this innovative textile machine manufacturer demonstrate the extensive design possibilities on offer.

#Research & Development

Testing and research laboratory ensures safe and more sustainable products worldwide

For 80 years, Hohenstein has stood for independent testing, scientific expertise and practical solutions. Today, the testing and research service provider supports manufacturers and brands worldwide in making textiles, hardlines and medical devices safe, more sustainable and market-ready – thereby building trust among consumers. With an international presence and interdisciplinary expertise, Hohenstein supports its customers from production through to market launch, helping them navigate an environment of growing regulatory and societal demands.

#Spinning

Perfect quality through collaboration: Machinery from Trützschler, Toyota and Murata at Zirve Tekstil

In today’s textile industry, excellence is not achieved by chance – it’s the result of deliberate decisions, technical expertise, and the courage to go beyond conventional paths. The Turkish company Zirve Tekstil has done just that: by combining the best technologies from Trützschler, Toyota and Murata, they’ve created a production setup that delivers outstanding yarn quality – recognized worldwide.

#Associations

Engineering depth and diversity for composites

Airbond is the latest member of the British Textile Machinery Association (BTMA) to receive recognition for contributions to the composites industry. The engineering firm based in Pontypool, South Wales, has just received the Make UK Energy and Sustainability Award for its Lattice 3D Printing project.

TOP