[pageLogInLogOut]

#Recycling / Circular Economy

The Renewable Materials Conference hits the mark again

440 participants discussed the defossilisation of the chemical and materials industry through biomass, CO2 and recycling. The audience voted for the "Renewable Material of the Year 2024": Acetic acid from CO2 by Danish start-up Again wins 1st price.
Renewable Materials Conference 2024 – Main Hall Impression © 2024 nova-Institute
Renewable Materials Conference 2024 – Main Hall Impression © 2024 nova-Institute


Over three days, 440 participants from 26 countries met, representing leading brand manufacturers, chemical and material companies, as well as the European Commission – DG Grow, Clima, Environment and RTD – and the Dutch and German governments. As in previous years, participants were extremely satisfied: High-quality, cutting-edge content in the 80 presentations, in-depth discussions in ten workshops, an exhibition, the election of the "Renewable Material of the Year 2024", extensive networking opportunities during the conference and the three evening events, an overall professional and enjoyable atmosphere (“special spirit”) – right down to a traditional carnival dance show from the region as a big surprise at the evening buffet. 

The event's platinum sponsor was UPM of Finland, which operates Europe's first new biorefinery in Leuna, Germany. 

Messages from the conference

Speakers highlighted the importance of moving to sustainable and renewable materials and the need to tackle Scope 3 emissions. The momentum for LCA and carbon footprints is now: "Measure what you treasure" (Ivana Krkljus, BASF).

Industry is on the verge of a major transformation, and the different corporate strategies are united by a clear commitment to bio- and CO2-based solutions, combined with recycling, to keep carbon in the cycle and remove all fossil carbon from the ground in the long term. The future industrial production will have to be completely redesigned to meet new challenges: "Biodiversity equals robustness equals resilience – resilience and adaptability will become more important than efficiency" (Lars Börger, industry insider).

The conference showcased a wide range of new products and facilities, many of which were only made possible through collaboration along the value chain. On the one hand, the conference focused on typical petrochemical building blocks such as naphtha or ethylene, which are now also produced using biomass, CO2, pyrolysis or gasification. On the other hand, there are completely new solutions such as fillers from lignin, glucopolymers or polyoil and PUR from rapeseed oil. There are many new renewable routes, especially for fine chemicals, personal care, coatings and adhesives or new premium quality snack packaging that contains 50 % recycled plastic and meets stringent food contact requirements.

A recurring theme in the presentations was that, unlike the US or China, Europe currently lacks an appropriate policy framework to support the transition to renewable carbon in the chemicals and materials sector. Two workshops discussed what instruments the EU should have at its disposal to transform the chemical industry while maintaining its competitiveness. Many ideas and impulses now need to be further developed.

Although biodegradation is not a major issue in Europe, unlike China or other Asian countries, key methods for understanding biodegradation are now established. For the first time, the fate of carbon in a biodegradable polymer can be tracked very precisely using isotope-labelled polymers to show that the carbon ends up as CO2 and in microbial biomass. A new technique using fluorescently labelled materials can also prove once and for all that certified compostable materials leave no microplastics behind. These advances in the scientific understanding of biodegradation will be used to prepare future regulations to implement the obligation to use biodegradable materials in relevant applications that end up in the environment.


Innovation Award “Renewable Material of the Year 2024”

For the fourth time, the innovation award “Renewable Material of the Year” was granted for the development of new technologies and applications, which combines all renewable material solutions in one competition – from biomass and CO2 utilisation to recycling. Six innovations were nominated by a panel of experts from 38 submissions. After 10-minute presentations by the nominees, the participants chose the winner. The innovation award was organised by the nova-Institute and sponsored by Covestro (Germany). The three winners in detail:

Innovation Award
Innovation Award "Renewable Material of the Year 2024", f.l.t.r.: Michael Carus (nova-Institut), Asta Partanen (nova-Institut), René Bethmann (VAUDE Sport, 3rd Place), Christoph Gürtler (Covestro, Award Sponsor), Ida Rask Kongsgaard (Again, 1st Place), Josefin Larsson (Resolo, 2nd Place) © 2024 nova-Institute


First Place

Again (Denmark): Acetic Acid and Other Chemicals Derived from CO2

By combining millennia-old bacteria with cutting-edge biotechnology, Again ferments waste CO2 emissions directly from flue gas into CO2-derived base chemicals such as acetic acid. Its novel biomanufacturing process captures unavoidable carbon emissions from industry and reuses them to produce valuable base chemicals for which there are currently few or no green alternatives, helping to defossilise some of the world’s most challenging value chains. This biomanufacturing process represents a paradigm shift, eliminating the need for energy and cost-intensive CO2 capture and purification. More information: https://again.bio 

Ida Rask Kongsgaard, Again: ”We are honoured to be awarded ‘Renewable Material of the Year 2024’ amongst an inspiring line-up of nominees at this year’s Renewable Materials Conference. A big thanks to our off taker HELM (Germany), who have been a pivotal support in our commercialization journey. We are excited to bring our products to the market together and to start defining the new normal for a greener chemical industry.”


Second Place

Reselo (Sweden): Rubber Made from 100 % Birch Bark

Reselo addresses the need for alternative fossil-free rubber polymers driven by external and internal pressures across the rubber industry. Reducing the climate impact of materials is a priority, but so far there has been little innovation in more sustainable solutions, especially in the rubber segment. Reselo Rubber is therefore very attractive as it is 100 % made from birch bark, a waste stream from the forest industry. The polymer can be processed in existing equipment and is compatible with current vulcanisation systems, elastomers and additives. Reselo Rubber is currently being used in a number of applications in collaboration with global companies to bring more sustainable products to the market. More information: https://reselo.se/ 

Josefin Larsson, Reselo: “Being recognized as the top three ‘Renewable Materials of the Year 2024’ by industry peers is an achievement we are very proud of and encourage us on our journey. More importantly, it is a testament to the need of welcoming new categories of materials from different bio-based resources to ultimately defossilise the rubber and plastic industry.“


Third Place

VAUDE Sport (Germany): First?ever Wood?based Polyester Textile Product

Until now, recycled PET has been favoured for textiles, but criticism is growing over quality concerns. With this first milestone, VAUDE, in cooperation with UPM (Finland), demonstrates the feasibility of tapping new European bio-based sources. The MEG in this demonstrator is made from wood residues and is intended as a drop-in solution without compromising on quality. The goal for the commercial version is a 100 % bio-based solution, which contains, besides bio-based MEG, fully bio-based purified terephthalic acid (PTA). VAUDE is demonstrating a scalable commercial approach to renewable PET and shows what such a solution could entail. More information: https://vaude.com 

René Bethmann, VAUDE Sport: “We are thrilled to have won third prize. This achievement once again underscores the importance of collaboration along the entire value chain and highlights that we can only achieve a sustainable transformation together.“



More News from TEXDATA International

#India ITME 2026

India’s textile industry: Current position, growth targets and industrial development

With ambitious export targets, major investments in manufacturing infrastructure and new international trade agreements, India is pursuing a comprehensive development strategy for its textile and apparel industry. An overview of the industry’s current position, government initiatives, progress achieved and challenges ahead.

#Weaving

“A complex design is only useful if the machine can reproduce it consistently”

Andreas Schnabel, Head of R&D for Technical Weaving Systems at Stäubli, discusses how 3D weaving can create textile reinforcements tailored to the loads within a composite component, where near-net-shape weaving can reduce processing steps and material waste, and what it takes to produce complex structures reliably and economically. He also explains how manufacturers can adapt Stäubli’s modular TF weaving platforms to new applications and how the company’s centre of excellence in Bayreuth supports the transition from research to industrial production.

#India ITME 2026

India ITME 2026: Textile technology meets India's investment ambitions

With ambitious growth targets, government incentive programmes and industrial development initiatives already underway, India is preparing for the next stage of its textile transformation. Against this backdrop, the 12th India ITME, taking place in Greater Noida from 4 to 9 December 2026, arrives at a particularly important moment for machinery manufacturers and textile producers alike.

#ITMA Asia + CITME 2026

ITMA ASIA + CITME 2026: Shanghai prepares for a record edition

With record demand for exhibition space, a strong presence of international technology suppliers and growing interest in automation and intelligent manufacturing, ITMA ASIA + CITME 2026 will provide an important overview of technological developments in the world’s largest textile producing region.

More News on Recycling / Circular Economy

#Recycling / Circular Economy

ReSpin founder Åsa Strandberg receives Innovation Champion of the Year 2026 award

Åsa Strandberg, founder and CEO of Swedish textile recycling company ReSpin AB, has been named Innovation Champion of the Year 2026. The award recognises her development of RespinJenny, a patented technology designed to recycle textile waste into new, high-quality fibres without using water, chemicals or additional virgin raw materials. The distinction was presented by the Olle Oscarsson Foundation and Axera Inkubator at Guldgalan in Sweden.

#Recycling / Circular Economy

Circulose resumes recycling of discarded cotton textiles and appoints interim CEO

Circulose today announced its restart of commercial-scale production plant at Ortviken in Sundsvall, Sweden, marking a significant step in scaling next-generation materials for the global fashion industry. The Ortviken plant is the world’s first commercial-scale chemical textile recycling facility. Its restart demonstrates that the fashion industry is seeking ways to scale proven solutions that move beyond pilots and into commercial production.

#Recycled Fibers

Reju expands textile-to-textile recycling network with six international fabric manufacturers

Reju, a textile-to-textile regeneration company, is expanding its industrial network through collaborations with six fabric manufacturers in Europe and the Americas. The initiative aims to accelerate the integration of regenerated polyester into textile manufacturing and support the development of finished fabrics for commercial applications.

#Recycling / Circular Economy

H&M Foundation highlights economic barriers to scaling circular textile systems

Discussions at Textile Exchange 2026 underline the need for coordinated investment, reliable material flows and a fair distribution of costs and risks across the textile recycling value chain.

Latest News

#ITMA Asia + CITME 2026

Saurer showcases flexible spinning solutions from bale to yarn at ITMA ASIA + CITME 2026

At ITMA ASIA + CITME 2026 in Shanghai, Saurer will demonstrate how its advanced technologies enable maximum flexibility across the entire spinning process, from bale to yarn and twisting. Visitors to hall 6.1, booth A58, can explore solutions designed to optimise production, improve efficiency and help mills respond quickly to changing market demands. Saurer's experts will be available to discuss individual production challenges and tailored solutions.

#India ITME 2026

Uster to present novel solutions at India ITME 2026

Tackling contamination is a critical quality target in yarn production – and Uster now enables spinners to make the right choices for optimized profitability, with top technology, precise data and integrated analysis across the entire process. The new Uster Contamination Control solution and latest Uster Vision Shield 3i put spinners in command of contaminant removal, ensuring yarn quality, minimizing waste and protecting profits. These exciting developments – and even more news – will be featured at India ITME 2026.

#Nonwovens

Freudenberg Performance Materials brings interlining production to Vietnam for faster regional supply

Freudenberg Performance Materials Apparel (Freudenberg Apparel) has expanded its manufacturing capabilities in Vietnam with local apparel interlining production at its factory in Long Thanh, Dong Nai. Apparel brands and manufacturers in Southeast Asia can now source both interlinings and comfortemp® thermal insulation from Vietnam, benefiting from shorter lead times, improved supply responsiveness, and consistent quality standards across Freudenberg Apparel’s regional manufacturing network.

#EU Textile Strategy

EURATEX and Egyptian industry groups sign textile cooperation agreement

The European Apparel and Textile Confederation (EURATEX) has signed a memorandum of understanding with the Apparel Export Council of Egypt (AEC), the Textile Export Council of Egypt (TEC) and the Egyptian Exporters Association (EXPOLINK). The agreement sets out plans to help Egyptian manufacturers prepare for EU sustainability requirements, promote investment and strengthen ties between European and Egyptian textile and clothing companies.

TOP