[pageLogInLogOut]

#Dyeing, Drying, Finishing

Acafintex looks to a bright future with new Monforts technology

Acafintex father and son ownership team Don Francisco and Lic Francisco Moyano at the new Monforts installation. © 2020 Monforts
At a total length of over 71 metres, the Montex finishing line that has just been installed by Monforts for Acafintex at its plant in Puebla, Mexico, is one of the highest capacity stenters the German technology leader has delivered to date.

Puebla is known as the epicentre of Mexico’s textile and clothing industry and is ideally placed for supplying both the USA and Europe, being three hours from the Gulf of Mexico for shipping via the Atlantic, and five hours from the Pacific coast as well.

Mexico's textile and clothing industry spans the entire production chain – from cotton growing and man-made fibre production to the manufacture of yarn, fabric, finished clothing and accessories. The industry is estimated to directly employ around 640,000 workers and to provide livelihoods for many more people indirectly. The country is a key supplier of textiles and clothing to the USA, but has faced fierce competition from China, which has until recently been the largest supplier of textiles and clothing to the US market.

However, the position of Mexico in the US import market has become more stable following the signing of the United States-Mexico-Canada Agreement (USMCA), which came into force in July this year. The country has also been a key beneficiary of the current trade war that is raging between China and the USA.

In addition, there is scope for higher sales in Mexico’s domestic market. The country has a population of 129 million people who are becoming increasingly prosperous, with a large proportion of younger people who are spending more on clothing.



On the Monforts TwinAir system, the airflows above and below the fabric being dried can be regulated completely independently of each other. © 2020 Monforts
On the Monforts TwinAir system, the airflows above and below the fabric being dried can be regulated completely independently of each other. © 2020 Monforts


Flexible operation

Founded in 1986, family-owned Acafintex operates as a commission dyehouse, finishing both knitted and woven fabrics for local companies in Mexico, in widths of between 100cm to 3.6 metres. The company is run by father and son team Don Francisco and Lic Francisco Moyano.

“We have very flexible operations for fabric finishing and also produce and sell our own fabrics for both the fashion industry and for the uniforms market,” says Don Francisco. “These days, we are increasingly finishing materials for technical textiles and for the automotive industry too. We have both local and international suppliers of both yarns and base fabrics and make sure we choose the best and most reliable sources. Exports now account for over 40% of our sales.”


More News from A. Monforts Textilmaschinen GmbH & Co. KG

#India ITME 2026

Monforts ready for India’s next phase of textile growth at ITME 2026

Advanced finishing, coating and energy-efficient processing will be highlighted by Monforts at India ITME 2026, as the region’s textile manufacturers increasingly look beyond volume production towards higher-value fabrics. The German finishing machinery specialist sees considerable potential in India as investment continues in conventional apparel and home textiles alongside rapidly developing markets for technical textiles, activewear, sportswear, filtration and automotive applications.

#IGATEX 2026

Impressive savings with Monforts’ stand-alone air/air heat exchanger

Having maintained an 80% share of Pakistan’s new stenter market with MONTEX machines for over 20 years and additionally now installed over 40 THERMEX dyeing ranges in the country, Monforts will highlight the benefits of its latest Universal Energy Tower at IGATEX 2026.

#Dyeing, Drying, Finishing

Turning new ideas into industrial reality at the Monforts ATC

The Monforts Advanced Technology Centre (ATC), initially opened in 2103 and subsequently expanded, continues to be an invaluable resource to customers from around the world in achieving new standards in fabric finishing.

#Dyeing, Drying, Finishing

Monforts on the move in textile growth markets

During September, specialists from Monforts will be attending events in two of the fastest growing countries for textile manufacturing – Kenya and Uzbekistan – before once again looking forward to meeting customers old and new at the 2026 Igatex exhibition which is taking place in Lahore, Pakistan, from October 15-18.

More News on Dyeing, Drying, Finishing

#ITMA Asia + CITME 2026

Mahlo introduces AI-supported Orthopac RVMC-20 plus at ITMA Asia 2026

From November 20 to 24, 2026, Mahlo GmbH + Co. KG will present its system portfolio for the textile industry at ITMA Asia in Shanghai. Together with its local sales and service partner Kuantex and Mahlo China, the Bavarian technology specialist will demonstrate at Booth C22 in Hall 7.1 how intelligent measurement and control technology can improve the quality and efficiency of textile production processes. The spotlight will be on the new Orthopac RVMC-20 plus, which combines precise weft straightening with fully integrated process control.

#Dyeing, Drying, Finishing

Brazilian market leader Cedro Têxtil focuses on greater efficiency, sustainability, and product quality with Brückner

After more than 150 years of company history, Cedro Têxtil is once again embracing the challenges of a changing industry. Widely recognized as the largest manufacturer of workwear fabrics in Latin America, the Brazilian textile company continues to invest in the modernization of its production facilities. A key milestone in this process was the decision to install a state-of-the-art Brückner stenter frame just over a year ago.

#IGATEX 2026

BW Converting, Archroma and Monforts to highlight precision spray finishing at IGATEX Pakistan 2026

BW Converting, Archroma and Monforts will participate in IGATEX Pakistan 2026, held Oct. 15–18 at the Expo Centre Lahore, at Al-Ameen Trading Corporation’s stand F-2-09 in Hall 2. Together, the companies will highlight precision spray-finishing technology, textile chemistry expertise and application-development support to help Pakistan’s textile manufacturers evaluate opportunities to improve finishing performance and production efficiency.

Latest News

#India ITME 2026

Stäubli to introduce new S3292 dobby for high-speed weaving at ITME India 2026

Stäubli will introduce its new S3292 dobby at ITME India 2026, taking place from December 4 to 9 at the India Expo Centre & Mart in Greater Noida, Uttar Pradesh. Designed for high-speed air-jet weaving, the new machine will be among the highlights of the company's presentation, which also includes warp preparation systems, cam motions, Jacquard technologies and digital services.

#Research & Development

DITF develops bio-based binding fibers for wood-fiber insulation materials

As part of the CelluWoodFlex project, the German Institutes of Textile- and Fiber-Research in Denkendorf (DITF) are developing bio-based cellulose ester fibers as alternative binding fibers for flexible wood fiber insulation materials. In addition to the spinning process and the production of suitable staple fibers, the institute is also investigating how wood and cellulose fibers can be separated and recycled at the end of their useful life.

#Recycled Fibers

Reju expands textile-to-textile recycling network with six international fabric manufacturers

Reju, a textile-to-textile regeneration company, is expanding its industrial network through collaborations with six fabric manufacturers in Europe and the Americas. The initiative aims to accelerate the integration of regenerated polyester into textile manufacturing and support the development of finished fabrics for commercial applications.

#Nonwovens

Magnera highlights HighPleat™ filtration media technology at FiltXPO 2026

At FiltXPO 2026, held on October 28–29 at the Minneapolis Convention Center in Minneapolis, Minnesota, Magnera highlighted advances in air filtration media architecture, with a particular focus on its HighPleat™ platform for MERV 8–10 applications. The technology combines a lofted fiber structure with optimized pore architecture to address the challenge of balancing filtration efficiency, airflow resistance and contaminant-holding capacity.

TOP