[pageLogInLogOut]

#Associations

ITMF’s Cotton Contamination Survey n°16/2022 reveals decreasing levels of contamination and stickiness

“ITMF’s Cotton Contamination Survey 2022 shows that the level of contamination of raw cotton by foreign matters and stickiness have decreased compared to 2019. At the same time the appearance of seed-coat fragments remained the same. The survey also reveals significant differences between cotton varieties.” These are the main conclusions from the “Cotton Contamination Survey n°16/2022” which has just been released by the International Textile Manufacturers Federation (www.itmf.org). This edition covers 104 spinning mills located in 21 countries which evaluated 78 different cotton growths.

Contamination – decrease

The level of cottons moderately or seriously contaminated as perceived by the spinning mills from around the world dropped from 25% in 2019 to 22% in 2022. A closer look at the extent of the contamination shows that 6% of all cotton evaluated were seriously contaminated by some sort of foreign matter whereas 16% were only moderately contaminated. As the summary data are arithmetic averages of the different contaminants, the extent of contamination is fully illustrated by the results for the individual contaminants. They range from 5% of all cottons processed being moderately or seriously contaminated by “tar” to 43% of them being moderately or seriously contaminated by “organic matter”, i.e. leaves, feathers, paper, leather, etc. Other serious contaminants are “strings made of plastic film” (31%), “fabrics made of plastic film” (39%), “strings made of woven plastic” (30%) as well as “Inorganic matter - sand/dust” (29%). The 10 most contaminated cotton descriptions considered for the survey originated in India (India-Others, MCU-5, DCH, Shankar-4/6, J-34), Pakistan (NAIB, MNH93), Afghanistan, Togo and Tanzania (Coastal). The 10 least contaminated raw cottons were produced in Spain, China (Anhui, Shandong), Australia, U.S.A. (Memphis Territory, Pima, Arizona, South-Eastern) and Mexico (Juarez).

Stickiness – decrease

The presence of sticky cotton as perceived by the spinning mills has been decreasing for almost 10 years (i.e. 23% in 2013 vs. 12% in 2022) and remains at the lowest level since 1989. The 10 descriptions that were most affected by stickiness originated from Afghanistan, the U.S.A. (Pima, Arizona), Tajikistan (Medium Staples), Cameroon, Brazil, Argentina, India (DCH), Sudan (Barakat) and Zimbabwe. On the other end of the range, cottons from Pakistan (MNH93), China (Shandong, Anhui, Hebei), Greece, South Africa, Mozambique, Sudan (Sudan-Others), the U.S.A. (Memphis Territory) and Uganda were not or hardly affected by stickiness.





Seed-coat fragments – stagnation

The appearance of seed-coat fragments in cotton growths remains an issue for spinners around the world. 33% of all cotton growths consumed contained moderate or significant amounts of seed-coat fragments (same as 2019). The 10 origins most affected by seed-coat fragments are Afghanistan, Pakistan (MNH93, NAIB), India (MCU-5, DCH, Shankar-4/6), Tanzania (Coastal), Egypt (Egypt-Other), Türkiye (Türkiye-Other), and Togo. The 10 cotton growth with the least presence of seed-coat fragments are Sudan (Sudan-Other, Barakat), Cameroon, Australia, Greece, Spain, China (Shandong, Hebei, Anhui), and Mexico (Mexico-Other).



More News from International Textile Manufacturers Federation (ITMF)

#Associations

SIMTA joins ITMF as Corporate Member

In the past two decades SIMTA has established itself as producer of specialized machinery for the textile industry. In short period of time, SIMTA became an important supplier of precise rollers for top OEMs. Afterwards SIMTA started manufacturing overhead cleaners, bobbin transport systems, and other textile ancillaries. In the meantime, SIMTA is a leader in this space in collaboration with the German automation technology partner Jacobi.

#Associations

Mr. Juan Parès (Spain) elected as new ITMF President

On October 24th, 2025, during the ITMF Annual Conference & IAF World Fashion Convention 2025 in Yogyakarta, Indonesia, the Committee of Management of the ITMF elected the members of the ITMF Board for the period 2025-2027.

#Associations

ITMF and IAF conclude successful Joint Convention 2025 in Yogyakarta, Indonesia

The International Textile Manufacturers Federation (ITMF) and the International Apparel Federation (IAF) have successfully concluded their second joint convention, held this year in Yogyakarta, Indonesia. In close collaboration with the host Indonesian Textile Association (API), the event gathered over 400 delegates from around the world from across the entire textile and apparel value chain.

#Associations

Winners of the ITMF International Collaboration Award 2025

The winners of the ITMF International Collaboration Awards 2025 will present their project at the upcoming ITMF & IAF Conference 2025 which will be held from 24 - 25 October in Yogyakarta, Indonesia and will be co-hosted by Indonesia Textile Industry Association (API).

More News on Associations

#Associations

European Business Coalition welcomes provisional application of EU–Mercosur Agreement and calls for Swift and full implementation

With the European Commission’s decision to provisionally apply the EU–Mercosur Interim Trade Agreement, a process spanning more than 25 years now moves decisively into its implementation phase.

#Associations

EDANA joins industry coalition urging a strong internal market legal basis for the New Circular Economy Act

EDANA has joined 67 European industry associations in a joint industry statement calling on the European Commission and co-legislators to anchor the forthcoming New Circular Economy Act (CEA) in the Internal Market legal basis (Article 114 TFEU).

#Associations

EDANA warns of consequences of misclassification of PET spunbond imports

EDANA would like to remind its members and industry stakeholders of the legal requirement to comply with the EU rules on customs classification when importing nonwovens from third countries outside the EU. In this regard, it was recently discovered that there appears to be a high level of customs misclassification occurring in our industry. This could have dangerous and costly consequences for importers.

#Associations

Engineering depth and diversity for composites

Airbond is the latest member of the British Textile Machinery Association (BTMA) to receive recognition for contributions to the composites industry. The engineering firm based in Pontypool, South Wales, has just received the Make UK Energy and Sustainability Award for its Lattice 3D Printing project.

Latest News

#Recycled_Fibers

Worn Again Technologies unveils the Accelerator

Worn Again Technologies unveils the Accelerator, the next major step towards commercialising its pioneering Textile-to-Fibre recycling process and proving the technical and economic feasibility of polycotton recycling.

#Knitting & Hosiery

Driving WARP KNIT Inspiration

KARL MAYER sees performance fabrics and next-level textile solutions in particular as potential growth drivers for its customers, as a motor for business development and as real game changers for the entire textile industry. Innovation does not happen by chance. It is the result of close exchange with customers & brands, textile expertise and competence in textile machine engineering. This is why KARL MAYER is investing in progress and collaborative development and opening its TEXTILE INNOVATION CEN-TER (TIC) – a place to be for the entire textile world.

#Dyeing, Drying, Finishing

Monforts unveils interactive digital platform for textile finishers

Monforts has launched a new digital platform designed to give textile manufacturers faster, more intuitive access to the company’s finishing technologies, technical expertise and aftersales support worldwide.

#Techtextil 2026

Knowledge that drives progress: Techtextil and Texprocess forums strengthen the global textile industry with a future-oriented programme

From AI-supported production optimisation and digital manufacturing solutions to circular technologies and bio-based high-performance materials: the Techtextil and Texprocess forums provide answers to the key challenges of the global textile industry with a curated content programme. As hubs for innovation and knowledge, they enhance competitiveness and offer orientation in changing markets. From 21 to 24 April 2026, Frankfurt is once again the global meeting point for thought leaders from industry, research and business.

TOP