[pageLogInLogOut]

#Sustainability

How to utilise CO2? The nominees for the innovation award “Best CO2 Utilisation 2021” have the answers!

© 2021 Nova Institute
Carbon capture and utilisation (CCU) is one of the most obvious solutions to further reduce CO2 emissions, but it is yet still hardly exploited. However, these six nominated technologies turn CO2 into value: ethanol, methanol, polyols, surfactants or syngas – the audience will choose the winner at the “9th Conference on CO2-based Fuels and Chemicals”, 23–24 March 2021, online!

Recently, many projects on CO2-based fuel and chemical production, as well as efficient capture and utilisation technologies have been launched by both start-ups and established companies, ranging from pilot over demonstration to commercial scale. Even more players are now expressing interest in getting involved in this field. Great visions are becoming real business cases and companies are starting to realise their potential. 

The advisory board of the “9th Conference on CO2-based Fuels and Chemicals” has now nominated six promising technologies as candidates for the innovation award “Best CO2 Utilisation 2021”. After a short presentation of all six nominees, three winners will be elected by the participants on 23 March 2021, the first day of the online conference (http://www.co2-chemistry.eu). The innovation award will be presented for the third time, it is sponsored by YNCORIS (Germany) and organised by nova-Institute (Germany) and CO2 Value Europe (Brussels).

The transition to direct CO2 utilisation as one alternative carbon source is needed to substitute fossil resources and to shift towards sustainable and climate-friendly production, paving the path to a circular economy and counteracting climate change. The internationally best-established conference on CO2 offers unique networking possibilities and invites the attendees of the entire Carbon Capture & Utilisation (CCU) and Power-to-X industry to learn about the latest innovations across the sectors and vote for their favourite candidate in the competition for the title “Best CO2 Utilisation 2021”. Further, the audience will be provided with most recent insights into CO2-based transport and aviation fuels and CO2-based bulk and fine chemicals. CCU technologies represent an essential contribution to a renewable carbon industry. All information, registration and the complete conference programme are available at: http://www.co2-chemistry.eu.

Here are the six nominees from four different countries!

bse Methanol (Germany): FlexMethanol

FlexMethanol will enable economically viable transformation of excess electrical power and off-gas CO2 into methanol as chemical energy storage and feedstock within small-scale and delocalised production units. Using a tailor-made catalyst, the direct conversion of CO2 is ensured without a cost-intensive water-gas-shift reactor. FlexMethanol consists of four industrially available process steps (electrolysis, CO2 scrubbing, methanol synthesis and distillation) as 10 and 20 MW modules scalable up to 100 MW. FlexMethanol significantly stabilises the revenues by dynamic operation according to the power market and price conditions, e.g., switching from feed into the grid and producing methanol from hydrogen. As a result, no feed storage tanks are necessary.

More information: http://www.bse-engineering.eu

Carbon Recycling International (Iceland): Emissions-to-Liquids Technology

Carbon Recycling International (CRI) has been developing its Emissions-to-Liquids (ETL) technology since 2006. CRI's first industrial demonstration plant was commissioned in Iceland in 2012. It has a capacity of 4,000 tonnes methanol per year. ETL converts CO2 and hydrogen into methanol in a one-step reaction. In 2020 the company moved from industrial demonstration scale to full commercial scale with a project in Anyang, Henan province, China. A plant, which will have a capacity of 110,000 tonnes methanol per year, will be commissioned in 2021. This represents an important step for CO2 hydrogenation projects worldwide. The CO2-based methanol is used for gasoline blending, biodiesel esterification, fuel cell operation, waste-water denitrification and chemicals production.

More information: http://www.carbonrecycling.is


Covestro (Germany): Washing with CO2-Technology – Surfactants based on CO2

CO2 instead of petroleum – Covestro is pursuing new avenues for turning the waste gas into a useful raw material. The goal is to use CO2 as resource in as many applications as possible. And the next scope is here to come: Surfactants based on CO2! First application tests have shown that these CO2-based surfactants can be used in a standard detergent formulation. The product development process is still in progress and the boundary conditions are already set: less fossil-based, less global warming potential, readily biodegradable and comparable washing performance – a new class of more sustainable surfactants for the everyday businesses. 

More information: http://www.covestro.de

Dimensional Energy (USA): HI-Light Reactor Platform

Dimensional Energy (DE) has developed a concentrated solar fuels platform technology for converting CO2 to syngas (CO + H2 mixtures) with remarkable efficiency of > 50 % CO2 conversion (3rd party verified by 350Solutions during the XPrize competition in Gillette, Wyoming, USA). The robust platform technology utilises DE catalysts, reactor designs, and software in an integrated unit, and was tested on-sun during the Carbon XPrize Finals. The 5 tonnes/year demonstration plant was shown to work during variable weather and with no catalyst degradation. The reactor is scalable to parabolic dish size, and the modular system can be easily expanded by additional units. Continued development of the platform will yield > 70 % conversion in 2021, and will integrate a Fischer-Tropsch reactor for kerosene production from the syngas. 

More information: http://www.dimensionalenergy.com

LanzaTech (USA): CarbonSmart Ethanol

The CarbonSmart Ethanol technology relates to capturing carbon and creating value from waste; effectively turning pollution into products. LanzaTech uses microorganisms to make ethanol from the carbon emissions of industrial processes like steel, syngas from municipal solid waste, waste wood or waste plastics. Ethanol is a chemical building block that can be used to produce a broad range of everyday products from household cleaning products, plastic shampoo bottles, furniture and toys, to fine fragrances and sporting goods. With a commercial plant in China that has produced over 20,000 tonnes of ethanol and mitigated over 100,000 tonnes of CO2 since 2018 and the first EU plant in Belgium in 2021, the technology is rapidly gaining traction in the market.

More information: http://www.lanzatech.com

UR One (Canada): Dissociation of Greenhouse Gas Oxides using Plaron Technology

Commercially ready carbon capture with 80 % lower operating and capital costs and dissociation of greenhouse gases including CO2, CO, NOx, SO2, SO. Carbon is captured as high value allotropes Buckminster Fullerenes with > 90 % capture rate. No consumables except electricity, and a small amount of water. All greenhouse gases from a 300 MW coal plant can be treated using only 3 MW of power and no back pressure. Only small amounts of electricity are required to separate molecules into their elemental components. Carbon is collected in water in the form of Buckminster Fullerenes (C60, C70, C80 and nano tubes) and other high value carbons. 

More information: http://www.urone-inc.com

Patronage, sponsors and partners

The nova-Institute would like to thank Professor Dr Andreas Pinkwart, Minister of Economic Affairs, Innovation, Digitalization and Energy of the State of North Rhine-Westphalia (Germany) for taking on the patronage of the conference.

Further, nova-Institute thanks YNCORIS (Germany) for sponsoring and CO2 Value Europe (Brussels) for co-organising the innovation award “Best CO2 Utilisation 2021”. The 9th Conference on CO2-based Fuels and Chemicals is supported by Gold Sponsor VTT (Finland), Silver Sponsor Covestro (Germany) and Bronze Sponsor Axel Semrau (Germany). Further information on our attractive sponsoring packages can be found at:

http://www.co2-chemistry.eu/sponsoring.

The nova-Institute also thanks its partner IASA e.V. (Germany) for supporting the conference. 

 

All information, registration and the full conference programme are available at:

http://www.co2-chemistry.eu.



More News from TEXDATA International

#ITM 2026

ITM 2026: The new geography of textile production

New production hubs are emerging across North Africa and Central Asia, while Türkiye is accelerating its transformation toward higher-value, technology-driven and more sustainable textile manufacturing.

#Research & Development

“Production is a product”

From technical textiles and AI-driven robotics to the limitations of textile circularity: Professor Dr Thomas Gries looks back on more than two decades of development at ITA Aachen. In the interview, he explains why production technology remains a decisive success factor, discusses international collaborations and innovation ecosystems, and shares his views on the transformation of production landscapes and the challenges facing an increasingly regulated industry.

#Knitting & Hosiery

“We need to move away from the price trap and return to a value-driven mindset.”

With its new Textile Innovation Center, KARL MAYER is sending a strong signal for innovation, collaboration, and the future of textile applications. In this interview, Karl Josef Mayer discusses new opportunities in warp knitting, the processing of staple fibres, recycling, the changing role of machinery manufacturers, and why the textile industry must once again focus more strongly on the value of textiles. by Oliver Schmidt

#Associations

“Innovation, resilience and international experience remain the great strengths of the Swiss textile machinery industry”

Geopolitical uncertainty, growing competitive pressure from China, new free trade agreements and the shift towards a circular economy are currently reshaping the global textile industry. In this interview, Cornelia Buchwalder discusses the current mood within the Swiss textile machinery sector, the industry’s distinctive innovative strength, new market opportunities in India and Asia, and the technological trends that could shape the upcoming trade fair cycle leading up to ITMA 2027.

More News on Sustainability

#Recycling / Circular Economy

The Or Foundation, adidas, BESTSELLER, H&M Group, and Inditex launch Apparel Recovery Coalition, responding to impacts of post-consumer textile exports

adidas, BESTSELLER, H&M Group, Inditex and The Or Foundation, with support from Circle Economy, unveiled the Apparel Recovery Coalition (ARC). The coalition will explore how producer responsibility systems can support circular pathways such as reuse, upcycling, recycling, and responsible waste management in countries that receive large volumes of exported secondhand apparel.

#Recycling / Circular Economy

NEUMÜHLE launches mono-material hoodie designed for textile recycling

With the Circular Mono Hoodie, Zurich-based label NEUMÜHLE introduces a new essential designed around a single-material principle. The textile construction is cotton throughout, right down to the sewing thread. Entirely free from elastane, the hoodie launches as a Limited Drop for CHF 139. Take-back, collection and existing recycling partnerships complement its circular design.

#Industry 4.0 / Digitalization

EIM evolves into a new Environmental Intelligence to measure the impact of textile production

¿Do we really know the environmental impact behind a garment? Answering this question remains one of the textile industry’s major challenges. Garment production involves multiple stages, from yarn and fabric to final finishing, carried out by different players across the supply chain. Accesing reliable data from each process, connecting it and establishing a common language are essential to understanding a product’s true impact.

#Associations

ITMF names three winners of the Sustainability & Innovation Award 2026

Three projects from the UK, Korea and China have been selected as winners of the ITMF Sustainability & Innovation Award 2026. The projects address textile-to-textile recycling, chemical recycling for automotive textiles and a regenerative approach combining silk production with ecological restoration.

Latest News

#Functional Fabrics

ROICA™ presents stretch textile innovations from nine partners at PERFORMANCE DAYS 2026

ROICA™ by Asahi Kasei will return to PERFORMANCE DAYS Munich on October 13–14, 2026, presenting textile developments from seven European partners and two Japanese specialists under its global brand message, “STRETCH YOUR FUTURE.” Visitors can discover the developments at Booth P10 in Hall A4.

#IGATEX 2026

SHIMA SEIKI to showcase flat knitting and digital design solutions at IGATEX Pakistan 2026

Leading computerized flat knitting technology provider SHIMA SEIKI MFG., LTD. of Wakayama, Japan, together with its Pakistani representative ALMURTAZA MACHINERY CO., (PVT) Ltd., will exhibit at the upcoming International Exhibition for Garment, Textile Machinery and Accessories (IGATEX Pakistan 2026) in Lahore, Pakistan, from October 15–18. SHIMA SEIKI will introduce computerized flat knitting machines, 3D design software and various web platforms as proposals for sustainable production through innovative shaping technology and the latest digital solutions.

#Dyeing, Drying, Finishing

Brazilian market leader Cedro Têxtil focuses on greater efficiency, sustainability, and product quality with Brückner

After more than 150 years of company history, Cedro Têxtil is once again embracing the challenges of a changing industry. Widely recognized as the largest manufacturer of workwear fabrics in Latin America, the Brazilian textile company continues to invest in the modernization of its production facilities. A key milestone in this process was the decision to install a state-of-the-art Brückner stenter frame just over a year ago.

#Digital Printing

Growth at the speed of demand: Kornit Digital brings digital textile innovation to PERFORMANCE DAYS 2026

Kornit Digital Ltd. (NASDAQ: KRNT) (“Kornit”), a global pioneer in on-demand digital fashion and textile production, will showcase the possibilities of digital, on-demand production at PERFORMANCE DAYS 2026, October 13–14 at Messe München, Hall 6, Booth E08.

TOP