#Spinning

2023-10-05

Sustainability of Savio delivers results

In its small reality, Savio is committed through its daily activities to contribute to a responsible choice toward people and the environment, for a sustainable future and development.

Among the initiative, Savio has joined the WHP - Workplace Health Promotion, a projet for the adoption of worker health and safety procedures and in the development of CSR or corporate welfare practices - has constructed a solar farm of 1MW which ensure 70% of the energy needed for the Pordenone plant, and, last but not least, has installed water dispenser spread throughout the factory.

3 years ago Savio has decided to install water dispensers spread throughout the factory to fill reusable bottles, in order to consume less plastic and learn the best practises of reuse and recycle. To support and promote this initiative, in March 2023, in occasion of the World Water Day, each employee received as a gift a reusable stainless bottle to bring to work, to gym and during freetime activities.

SOME DATA:

Since the installation, August 29th 2020, the water fountains dispensed 49.821 liters of water, which means 75 liters per day equal to 150 resusable bottled filled every day. In 3 years SAVIO has saved 99.000 plastic bottles and 7,9 tons of CO2!

So, Savio cares: water affects everyone, and for Savio, the action taken is an important step for a long-term sustainable future.

Savio Macchine Tessili will exhibit at ITM Istanbul 2026 presenting its flagship technologies

Savio Macchine Tessili will participate in ITM Istanbul 2026 in a corporate booth of Vandewiele Group, showcasing a selection of its most advanced winding and spinning solutions designed to support textile mills in achieving higher efficiency, flexibility and yarn quality. The company will bring to the show three flagship solutions: Proxima Smartconer®, Lybra Smartspinner® and the Phoenix Assembly Winder.

Innovative Textile Recycling: New Partnership to simplify textile processing at the Recycling Atelier

Savio Macchine Tessili S.p.A. from Italy collaborates with the Recycling Atelier of Technical University of Applied Sciences Augsburg and ITA Augsburg since September 2024. Savio will support the Recycling Atelier in the areas of winding and quality control of yarns. This cooperation completes the process chain for mechanical textile recycling and opens up new research possibilities.

Rieter sees Barmag integration on track as orders and sales rise

The first half of 2026 was shaped by the successful completion of the largest acquisition in Rieter’s history. The Man-Made Fiber Division enables entry into the growth segment of man-made fibers and sustainably strengthens Rieter’s market position in the Asia region. The expanded Group is now the world’s leading system supplier for the processing of natural and man-made fibers. In the first half of the year, initial cost savings in material costs and operating expenses have already been realized. The targeted synergies are expected to amount to at least CHF 20 million by the end of the 2028 financial year. Due to the completion of the acquisition on February 2, 2026, the first half of the year for the Man-Made Fiber Division only amounts to five months.

Barmag Fuzhou Customer Day concludes successfully, boosting high-quality chemical fiber growth in Fujian & Guangdong

Barmag hosted its Customer Day themed “A New Era. Powered by Innovation.” in Fuzhou on June 28, welcoming nearly one hundred invited customers from Fujian and Guangdong provinces. Georg Stausberg, CEO of Barmag Group, attended along-side the sales and R&D expert China team to jointly present integrated solutions covering the entire man-made fiber value chain.

STEELTOP®: A new benchmark in flat tops for spinning preparation

Modern carding generations achieve higher production performance, placing significantly greater stress on flat tops. Higher cylinder speeds and increased fiber density, combined with tighter carding gaps, create more demanding operating conditions. At the same time, poorer raw material quality and the increased use of recycled materials further intensify these challenges. With STEELTOP®, Trützschler introduces a new full steel flat top series developed for these demanding modern carding processes.

Ibrahim Fibres and Trützschler: A strong partnership enters its next phase with the TC 30Si

For more than two decades, Ibrahim Fibres and Trützschler have grown side by side, driven by a shared ambition to continuously improve spinning performance, strengthen technology leadership and set new benchmarks in the textile industry. Today, Ibrahim Fibres is a leading yarn and polyester staple fiber manufacturer in Pakistan. The company operates the largest number of Trützschler cards in the country, with more than 200 machines running across its mills in Faisalabad, and plays an important role in one of Asia’s largest textile industries.

C&S strengthens its governance to support its evolution

C&S announces the appointment of Marco Lucietti to its Board of Directors. With extensive international experience across the textile and denim industries, Lucietti will work alongside CEO Federico Corneli, contributing to the company’s managerial development, organizational structure and long-term strategic direction.