#Recycling / Circular Economy

2021-03-25

Evonik aims to generate additional sales of at least €350 million by 2030 with solutions for circular plastics

Company pools its circular plastics activities in push towards more sustainable solutions

Extensive solutions for recycling technologies keep raw materials in loop

Evonik cooperates closely with partners along the value chain

Evonik is pooling its activities for circular plastics in a global program. As part of the transition to a circular economy, the company offers its customers solutions for all stages in the polymer value chain. Additives and technologies from Evonik make mechanical and chemical recycling more efficient thus improving the availability of circular plastics. Evonik will also increase the use of sustainable raw materials from circular sources in its own production processes. Overall, the company expects its global circular plastics program to generate additional sales of more than €350 million a year by 2030.

“The careful use of resources and protection of the climate leads us down the path towards a circular economy,” said Harald Schwager, deputy chairman of Evonik's executive board, who is responsible for innovation. “We have the innovative capability to create new materials cycles with fewer fossil-based feedstocks and more circular ones. We intend to utilize that potential.”

More than 350 million metric tons of plastics are produced worldwide every year. However, only a small fraction of that amount is recycled. Evonik can facilitate the transformation to a circular economy for sustainable plastics applications with its additives and solutions, and that at competitive cost and quality.

“We are working closely with partners along the entire polymer value chain to make this happen,” said Lauren Kjeldsen, who is responsible for Evonik's global circular plastics program. “Innovations are the key to success.”

In mechanical recycling, plastics are sorted, prepared and washed, before being melted and granulated into a recyclate. This procedure is used mainly for thermoplastics and in a similar process for old tires. Evonik experts are working to help recyclers significantly improve the efficiency and quality of the processes. For example, customized surfactants are used to make sure labels can be removed quickly without leaving residues, while defoamers simplify washing processes and dewatering agents save energy and time in subsequent drying. Another focus is minimizing the odor of the recyclate. Specialty additives from Evonik can increase the amount of high-quality re-usable recyclate obtained by about 5 percent. Evonik aims to offer such solutions for about 400,000 metric tons of recyclable plastics by 2025.

Evonik is also working on various chemical recycling technologies for plastic waste that cannot be recycled mechanically. Here, the polymer chains are split to obtain building blocks for the production of new plastics. For example, Evonik is currently developing a process to facilitate recycling of heavily contaminated polyethylene terephthalate (PET) waste. New molecules for high-end applications can be obtained via methanolysis.

Another method of chemical recycling is controlled incineration of plastic waste to produce pyrolysis oils or synthesis gases. Evonik offers modern technologies that play a part in making these processes more efficient. Examples are additives, catalysts, and membranes for the treatment of gas. These pyrolysis oils and synthesis gases can be used as raw materials for the production of plastics.

All of these processes have one thing in common: The goal is to replace fossil-based resources such as oil wherever possible, avoid waste, and minimize carbon dioxide emissions.

“Production is a product”

From technical textiles and AI-driven robotics to the limitations of textile circularity: Professor Dr Thomas Gries looks back on more than two decades of development at ITA Aachen. In the interview, he explains why production technology remains a decisive success factor, discusses international collaborations and innovation ecosystems, and shares his views on the transformation of production landscapes and the challenges facing an increasingly regulated industry.

“We need to move away from the price trap and return to a value-driven mindset.”

With its new Textile Innovation Center, KARL MAYER is sending a strong signal for innovation, collaboration, and the future of textile applications. In this interview, Karl Josef Mayer discusses new opportunities in warp knitting, the processing of staple fibres, recycling, the changing role of machinery manufacturers, and why the textile industry must once again focus more strongly on the value of textiles. by Oliver Schmidt

“Innovation, resilience and international experience remain the great strengths of the Swiss textile machinery industry”

Geopolitical uncertainty, growing competitive pressure from China, new free trade agreements and the shift towards a circular economy are currently reshaping the global textile industry. In this interview, Cornelia Buchwalder discusses the current mood within the Swiss textile machinery sector, the industry’s distinctive innovative strength, new market opportunities in India and Asia, and the technological trends that could shape the upcoming trade fair cycle leading up to ITMA 2027.

EU ban on destroying unsold clothing and footwear now in force

The European Union's ban on the destruction of unsold clothing, clothing accessories and footwear has entered into force. Since July 19, 2026, large companies across the EU have been prohibited from destroying unsold textile products, while medium-sized companies will be required to comply with the same rules from 2030.

Circ launches first denim collection with H&M featuring TENCEL™ | Circ® with REFIBRA™ technology

Circ today announced that the first men's denim collection featuring TENCEL™ | Circ® with REFIBRA™ technology is now available at H&M, marking the commercial delivery of this unique pilot project first announced in October 2025. Featuring two styles available across the UK, Scandinavia, Central Europe, Eastern Europe, South Europe, Turkey, North America, Mexico, Canada, and the Middle East, the launch brings TENCEL™ | Circ® with REFIBRA™ technology into H&M's standard men's denim assortment for the first time.

Eastman Naia™ brings its inside-out denim vision to Kingpins New York

Following its debut at Kingpins Amsterdam, Eastman Naia™ brings the next chapter of its denim story to Kingpins New York, taking place July 22–23. At Booth Green 7, Naia™ presents its denim proposition built around three complementary design directions: Performance Denim, Fashion Denim and Authentic Denim.