[pageLogInLogOut]

#Recycling / Circular Economy

EuRIC plastics webinar brings together 250+ participants to tackle Europe’s plastics recycling crisis

Over 250 industry stakeholders gathered at EuRIC’s webinar on 4 March to address a critical question: How can Europe resolve its plastics recycling crisis? The discussion highlighted the pressing challenges faced by the industry and the policy measures needed to ensure its sustainability and competitiveness.

“The plastics recycling industry is not immune to the pressures of high energy prices and a lack of commitment across the value chain,” stated Sophie Sicard, President of EuRIC’s Plastics Recycling Branch (EPRB), as she opened the webinar. She pointed to weak domestic demand and the surge in imports from third countries as key factors exacerbating the crisis.

Maria Vera Duran, EuRIC’s Senior Technical Manager, presented the EU Plastic Recyclers’ Roadmap released in December, which outlines essential policy recommendations. These include, among others, establishing End-of-Waste (EoW) criteria, introducing financial incentives like lower VAT for circular materials, and adopting a risk-based approach to hazardous substances. Additionally, she stressed that the new Waste Shipment Regulation (WSR) and the upcoming ban on plastic waste exports to non-OECD countries will increase the waste available for recycling in the EU, and thus, intensify the need of a strong internal market for recyclates.

The panel discussion reinforced the urgent need to align sustainability with competitiveness. Featuring insights from Judit Guerra-Falcon (Plastics Europe), Joost Schollaert (Galloo Plastics), and Mathias Bach Kirkegaard (Denmark’s Permanent Representation to the EU), the panel warned of a potential oversupply of recycled plastics by the end of 2026 and the risk of deindustralisation in Europe. The speakers emphasised the necessity of design-for-recycling principles and ambitious mandatory recycled content targets, particularly in light of the proposal for a Regulation on End-of-Life Vehicles (ELVs) and the Clean Industrial Deal.

EuRIC extends its gratitude to all speakers and participants for their valuable contributions to this crucial discussion. The full webinar recording is available here.



More News from Recycling Europe (ex EuRIC AISBL)

More News on Recycling / Circular Economy

#Recycled Fibers

Indorama Ventures enables brands to scale circular textiles through proven, traceable supply chains

Indorama Ventures, a global leader in recycled polyester staple fibers and filament yarns, will exhibit at Textiles Recycling Expo in Brussels on June 24–25. At the event, the company will show how brands and textile manufacturers can build traceable, circular textile supply chains by working with proven partners who deliver recycled materials on an industrial scale.

#Recycled Fibers

RECOVER™ launches Recover™ Yarns to accelerate recycled cotton uptake

Recover™, a leading materials science company and one of the world’s largest producers of recycled cotton fiber, today announces the launch of Recover™ Yarns, a curated portfolio of ready-to-use yarn solutions designed to accelerate the adoption of recycled cotton across the apparel supply chain.

#ITM 2026

Uster’s new Recycling Opening Index guides spinners to the perfect blend

Uster AFIS 6 now offers the key data for better decisions when blending recycled fibers. Process control is decisive in determining the quality and economic outcome. The new R Recycling Module of AFIS 6 introduces the Recycling Opening Index (ROI), so spinners can optimize their circularity credentials. It was officially launched at ITM 2026 in Istanbul, Türkiye.

#Recycling / Circular Economy

Mesdan to showcase laboratory-scale textile recycling solutions at Textiles Recycling Expo 2026

At Stand 2235 during the Textiles Recycling Expo 2026 in Brussels, Mesdan will present laboratory solutions designed to support the development and evaluation of textile-to-textile recycling processes.

Latest News

#Spinning

Barmag and Hitech Automation enter into partnership for an auto-doff system for texturing machines

Barmag (Suzhou) Technology Co., Ltd. and Hitech Automation Solutions PVT LTD. of Surat, India, have agreed to an exclusive partnership to jointly market Hitech’s Doffmatic automation solution for Barmag’s proven manual eFK texturing machines. In many texturing facilities, manual doffing processes remain heavily operator-dependent – resulting in issues such as increased scrap, inconsistent quality, and limited productivity.

#HIGHTEX 2026

The heart of the technical textiles and nonwovens world will beat in Istanbul

Only 1 day remains until HIGHTEX 2026 International Technical Textiles and Nonwovens Exhibition opens its doors. Bringing together manufacturers, technology developers, investors, and industry professionals from around the world, HIGHTEX 2026 is preparing to showcase the innovations shaping the future of the industry. As the countdown to this major event continues, Istanbul is once again getting ready to become the meeting point of the global technical textiles industry.

#Man-Made Fibers

Grasim Industries announces fresh investment of ₹3094 Crore to expand Lyocell capacity

Grasim Industries Limited, the flagship company of the Aditya Birla Group and a global leader in cellulosic fibres, today announced an investment of ₹3,094 crore, for Phase II Lyocell capacity of 110K TPA at Harihar, Karnataka. This expansion will consist of 2 lines of 55K TPA (150 Tons per day) each. The first line is expected to be commissioned by 2028, and the second line is expected to be commissioned by 2030.

#ITM 2026

The future of textiles, the power of trade, and the summit of technology come together at ITM 2026

ITM 2026 International Textile Machinery Exhibition, one of the most prestigious organizations in the textile technologies sector, opens its doors to visitors between June 9-13. Expected to break records in terms of both exhibitor and visitor numbers, as well as the technological vision it presents, ITM 2026 will transform into a global trade hub with machine sales, and new business collaborations.

TOP