[pageLogInLogOut]

#Nonwovens / Technical Textiles

Livinguard Technology proven effective against Indian isolate of SARS COV 2 (Covid 19, wild version)

Livinguard, the company that developed protective face masks with COVID-19-deactivating properties, announced today that its technology has been proven effective by an independent laboratory against the Indian isolate of SARS COV 2 – Covid 19, wild version. The tests were carried out by the renowned Indian National Institute (NII) of Immunology on Livinguard’s face mask fabric.

The detailed results indicate that each layer of the Livinguard mask has an average of > 99% effectiveness against the Indian isolate of SARS COV 2 (wild version). These results are positive news for the many geographies dealing with a Delta variant outbreak, and who will be able to rely on Livinguard face masks for their population’s health and safety.

The proof of Livinguard’s technology effectiveness against the Indian isolate of SARS COV 2 (Covid 19, wild version) come also in a context of renewed demand for facemasks in light of new mask wearing requirements being rolled-out worldwide. In fact, the WHO recently urged fully vaccinated people to continue wearing masks as the Delta variant spreads. For some health experts, wearing facemasks might actually determine if one catches the Delta variant.

Speaking about the positive results received today, Sanjeev Swamy, Livinguard CEO, said “We are making everything possible to address the demand from the increasing number of regions that are making it mandatory to wear a mask outside and inside again. Over the past 24 months, Livinguard has been tirelessly updating its self-disinfecting technology and this is yet another example of the company rising to the challenge in a race against the clock.”

The principle underlying the Livinguard technology is the deactivation of microbes including bacteria and viruses*. The technology applies a positive charge at the molecular level to textile surfaces, making them more powerful than the negative charge of microbes. Therefore, microbes are deactivated when they encounter textiles treated with Livinguard Technology. Textiles treated with Livinguard Technology have also been proven to deactivate viruses, including SARS-CoV-2* (the virus that causes COVID-19) by researchers at the Free University Berlin and the University of Arizona. Furthermore, Livinguard Technology is safe for humans and the environment.




Positive results come in context of renewed demand for facemasks in light of Delta variant outbreak and new mask wearing requirements worldwide (c) 2021 Livinguard
Positive results come in context of renewed demand for facemasks in light of Delta variant outbreak and new mask wearing requirements worldwide (c) 2021 Livinguard


The company is now focusing on pivoting its production facility to scale the delivery of its sustainable hygiene technology worldwide.

For information about Livinguard and its groundbreaking technologies please visit www.livinguard.com. To find Livinguard products please visit shop.livinguard.com.


More News from

#India ITME 2026

Stäubli to introduce new S3292 dobby for high-speed weaving at ITME India 2026

Stäubli will introduce its new S3292 dobby at ITME India 2026, taking place from December 4 to 9 at the India Expo Centre & Mart in Greater Noida, Uttar Pradesh. Designed for high-speed air-jet weaving, the new machine will be among the highlights of the company's presentation, which also includes warp preparation systems, cam motions, Jacquard technologies and digital services.

#Research & Development

DITF develops bio-based binding fibers for wood-fiber insulation materials

As part of the CelluWoodFlex project, the German Institutes of Textile- and Fiber-Research in Denkendorf (DITF) are developing bio-based cellulose ester fibers as alternative binding fibers for flexible wood fiber insulation materials. In addition to the spinning process and the production of suitable staple fibers, the institute is also investigating how wood and cellulose fibers can be separated and recycled at the end of their useful life.

#Recycled Fibers

Reju expands textile-to-textile recycling network with six international fabric manufacturers

Reju, a textile-to-textile regeneration company, is expanding its industrial network through collaborations with six fabric manufacturers in Europe and the Americas. The initiative aims to accelerate the integration of regenerated polyester into textile manufacturing and support the development of finished fabrics for commercial applications.

#Nonwovens

Magnera highlights HighPleat™ filtration media technology at FiltXPO 2026

At FiltXPO 2026, held on October 28–29 at the Minneapolis Convention Center in Minneapolis, Minnesota, Magnera highlighted advances in air filtration media architecture, with a particular focus on its HighPleat™ platform for MERV 8–10 applications. The technology combines a lofted fiber structure with optimized pore architecture to address the challenge of balancing filtration efficiency, airflow resistance and contaminant-holding capacity.

More News on Nonwovens / Technical Textiles

#ITMA Asia + CITME Singapore 2025

ANDRITZ sets focus on textile recycling and durable nonwoven production technologies at ITMA Asia 2025

International technology Group ANDRITZ will be presenting its innovative nonwovens production and textile solutions at ITMA ASIA + CITME 2025 in Singapore, from October 28 to 31, 2025 (Hall 2, D106). ANDRITZ will showcase its MMCF production plants, textile sorting and recycling, bast fiber processing, needlepunch, airlay, and life-cycle service technologies, with a focus on sustainable solutions. Discover how these innovations can grow your business opportunities and support a greener future.

#ITMA Asia + CITME Singapore 2025

Dilo Group at ITMA ASIA Singapore 2025

At ITMA ASIA Singapore, the Dilo Group will exhibit at Booth No. H2 – D202. Together with Kansan Materials, Izmir, the company will present its latest developments and looks forward to welcoming visitors to exchange ideas and explore innovations in needling technology.

#Nonwovens

OUTLOOK™ 2025: Charting a sustainable and innovative future for the Nonwovens Industry

EDANA concluded its flagship event, OUTLOOK™ 2025, last week, marking it as a major success and addressing the biggest questions facing the industry. The three-day conference highlighted the urgent need for a unified approach to sustainability, regulation, and innovation in the absorbent hygiene and wipes sectors.

#Nonwovens

Global Nonwovens Alliance unveils Inaugural Board, advancing collaboration and growth worldwide

The Global Nonwovens Alliance (GNA), a tax-exempt federation jointly founded by INDA, the Association of the Nonwoven Fabrics Industry, and EDANA, the Voice of Nonwovens, announces the appointment of its founding Board of Directors. This group of leaders represents some of the most influential executives across the nonwovens value chain and reflects GNA’s mission to foster global collaboration, innovation, and growth in the industry.

Latest News

#Nonwovens

Ahlstrom expands depth filtration media production capacity at US facility

Ahlstrom has completed a major investment in its Kingston manufacturing facility in New York, USA, expanding production capacity for high-performance depth filtration media. The modernization of Line 3 is designed to improve manufacturing efficiency, enhance quality control and increase flexibility in producing different product widths.

#Technical Textiles

Autoneum to acquire Trèves Group, creating automotive supplier with over CHF 2.9 billion in revenue

Swiss automotive supplier Autoneum has announced an agreement to acquire the French Trèves Group, a specialist in automotive acoustic and thermal insulation, interior trim and trunk solutions. The transaction is expected to create a combined organisation with pro-forma revenue exceeding CHF 2.9 billion in 2026, strengthening Autoneum's position in the global automotive supply industry.

#Nonwovens

Freudenberg presents Filtura® filter media for demanding industrial applications at FSA 2026

Freudenberg Performance Materials will present its Filtura® filter media for demanding industrial filtration applications at Filtration & Separation Asia (FSA), taking place from November 18 to 20, 2026, in Shanghai, China. The focus will be on pleatable filter media for air pollution control (APC), designed for applications including metal processing, lithium-ion battery material production and recycling, and metal additive manufacturing.

#Nonwovens

Freudenberg and UMT present expanded advanced wound care portfolio at COMPAMED 2026

Freudenberg Performance Materials and UMT will present their combined expertise in advanced wound care at COMPAMED 2026, taking place from November 16 to 19 in Düsseldorf, Germany. Following the merger of the two companies, customers now have access to an expanded portfolio of medical materials and technologies, ranging from gelling wound dressings and silicone-coated foams to non-invasive wound closure solutions.

TOP