[pageLogInLogOut]
TRÜTZSCHLER SPINNING - THE NEW CARD

#Industry 4.0 / Digitalization

Lenze honored as "Best Place to Learn”

© 2021 Lenze
Lenze has achieved the hattrick and once again received the seal of approval "Best Place to Learn" for training companies. Niels Köstring, Managing Director at the certifier AUBI-Plus, presented the seal during a virtual ceremony and praised the very good performance of the automation specialist from Hamelin. In a comprehensive 360° survey, both current and former trainees and students had previously awarded top marks.

For the third time in a row the automation expert received the seal of quality for his training

Thomas Czekanowski, Head of Education & Training at the Lenze Group, is pleased: "We are particularly proud to have finished with the grade "very good". It shows once again the importance of training at Lenze and how forward-looking it is." The company achieved top results in the categories "Apprentice recruitment process" and "Professional learning in the company", among others. This means that Lenze can continue to call itself "Best Place to Learn" for the next three years.

Bernd Kirsch, Head of Education & Training Electronic, explains: "The analysis results show us where we currently stand with our training and in which areas we already have a particularly high level of training. But they also enable us to look ahead, because we can see where we still have potential for improvement. From this, we derive appropriate measures and ensure continuous high-quality and, above all, future-proof training."


“Best Place to Learn” is a seal that stands for above-average in-company training. It is awarded exclusively to companies that demonstrate that they provide young people with excellent qualifications. The training seal is based on a scientifically recognized quality model. Various aspects of training are analyzed and evaluated. In addition, trainers, current and former trainees, and students are included in the evaluation in the form of 360° feedback. The award is based on representative results.


More News from Lenze SE

#Industry 4.0 / Digitalization

Lenze receives IEC 62443-4-1 certification: TÜV Rheinland confirms cyber-secure development process

Lenze SE has been certified according to IEC 62443-4-1 since November 2025. TÜV Rheinland thus confirms that Lenze meets the requirements of this internationally recognized standard for a secure development process for industrial automation and drive products. The certification is an important milestone on the way to implementing the EU Cyber Resilience Act (CRA), which will become mandatory for machine manufacturers and their suppliers from December 2027.

#ITMA Asia + CITME Singapore 2025

Lenze at ITMA Asia 2025: Smart, Robust and Cost-Efficient Motor Drive System IE5/IE6 for the Textile Future

At the world's largest trade fair for textile and apparel technology, ITMA Asia (October 28-31, 2025 in Singapore), Lenze will be presenting innovative automation solutions for the textile value chain in Hall 7, Stand B201. The focus will be on energy-efficient drive packages, modular machine concepts and scalable software solutions - developed for mechanical engineers and end users who rely on sustainable technologies. Lenze has been a reliable partner to the textile industry for over 77 years.

#Industry 4.0 / Digitalization

New alliance for high-performance drive technology

The Lenze Group, international specialist for drive technology and automation solutions, and Sonepar in Germany, leading electrical wholesaler, have entered into a sales partnership with a focus on innovation and market penetration. Since 1 July 2025, Sonepar has been an official "Lenze Performance Partner Distribution" - with the aim of bringing innovative drive solutions to industry faster and more comprehensively.

More News on Industry 4.0 / Digitalization

#Industry 4.0 / Digitalization

Jeanologia and BCome connect factory data with Life Cycle Assessment and Digital Product Passports

A new white paper by EIM by Jeanologia and BCome demonstrates how primary environmental data from denim finishing processes can be integrated into a garment's Life Cycle Assessment (LCA) and prepared for use in a Digital Product Passport (DPP). A comparative case study highlights significant improvements at the production stage while also showing how these translate into the environmental performance of the finished garment.

#Industry 4.0 / Digitalization

White House reduces production planning time by up to 80% with Coats Digital’s FastReactPlan

Indian garment manufacturer White House has reduced its production planning cycle by 60–80% following the implementation of Coats Digital’s FastReactPlan software. The integrated planning solution provides greater visibility across production, capacity and material requirements while supporting faster decision-making and improved delivery performance.

#Industry 4.0 / Digitalization

Jeanologia presents expanded EIM platform and COMMON GROUND collection at Kingpins Amsterdam

Jeanologia is presenting two approaches to textile product development at Kingpins Amsterdam on October 14–15: measuring the environmental impact of textile production and exploring new creative possibilities through garment finishing technologies.

#Software

UNIFEQ Europe adopts Coats Digital’s GSDCost and AI-powered GSDQuest to support rapid growth

Coats Digital is pleased to announce that rapidly growing Polish defence and uniform manufacturer UNIFEQ Europe Sp. z o.o. has invested in its award-winning GSDCost solution together with its AI-powered GSDQuest platform to establish a consistent approach to garment costing, improve sewing-floor productivity and accelerate labour costing for tenders and new products.

Latest News

#Textile processing

YKK Bangladesh celebrates 25 years of fastening production and business development

YKK Bangladesh Pte. Ltd., a subsidiary of Japanese fastening manufacturer YKK Corporation, has celebrated its 25th anniversary with a commemorative ceremony in Dhaka on November 8, 2026. Since its establishment in November 2000, the company has expanded its manufacturing capacity and business operations alongside the growth of Bangladesh's apparel industry.

#ITMA Asia + CITME 2026

Murata Machinery to showcase AIcone winding and high-speed VORTEX spinning at ITMA ASIA 2026

Japanese textile machinery manufacturer Murata Machinery will present its PROCESS CONER AIcone automatic winder and VORTEX 870 EX spinning machine at ITMA ASIA + CITME 2026. Under the theme “Right Choice, Bright Future”, the company will highlight technologies for efficient yarn manufacturing, combining energy-saving winding solutions with high-speed air-jet spinning. Visitors can meet Murata Machinery in Hall 5, Booths E01 and E02.

#ITMA Asia + CITME 2026

DORNIER highlights airbag, filtration and composite weaving technologies at ITMA ASIA 2026

Lindauer DORNIER will present its latest developments in air-jet and rapier weaving technology for technical textiles at ITMA ASIA + CITME 2026. The German machinery manufacturer will focus on the reliable and efficient production of airbag fabrics, high-density filters and reinforcement textiles for fibre-reinforced composites. Alongside its A2 air-jet and P2 rapier weaving machines, DORNIER will highlight its TRITOS FLEX technology for complex 3D composite preforms, retrofit solutions and expanded service capabilities in Asia. The company will exhibit in Hall 3, Stand E02.

#Retail & Brands

Marks & Spencer expands across Asia Pacific through partnership with Global Fashion Group

Marks & Spencer (M&S) and Global Fashion Group (GFG) have announced a strategic partnership to expand the British retailer's fashion business across Asia Pacific. M&S has launched on Southeast Asian fashion platform ZALORA and plans to enter THE ICONIC in Australia and New Zealand in early 2027. The agreement also introduces regional fulfilment for Australian M&S.com orders, enabling faster deliveries and returns while supporting a capital-light international growth strategy.

TOP