#ITMA Asia + CITME 2024

2024-10-10

New double raschel machine impresses with its price-performance ratio

Premiere of the DM 6/2-6 EN for the highly efficient production of lightweight spacer fabrics at KARL MAYER's in-house show during ITMA ASIA + CITME.

KARL MAYER has further differentiated its range of double raschel machines and thus better tailored them to market requirements. The DM 6/2-6 EN is a new addition to the family of high-performance machines for the production of spacer fabrics. With a speed of 850 rpm, this newcomer offers the same working speed as its range neighbours, the RD 6/1-12 EN and RD 7/2-12 EN. However, thanks to its special technical focus on the production of lightweight 3D warp-knitted fabrics, it is significantly lower in price. The configuration on offer includes a trick plate distance of 2 to 6 mm and a working width of 138? making the DM 6/2-6 EN ideal for the highly efficient production of spacer fabrics for the luggage and furniture sector. The flexible RD 6/1-12 EN is still the machine of choice for the production of technical spacer fabrics for home textiles and plush applications, while the RD 7/2-12 EN sets standards in the production of 3D articles with a wide range of designs for shoes and automotive applications.

If you want to see the performance of the DM 6/2-6 EN for yourself, you should visit the in-house show during the upcoming ITMA ASIA + CITME at KARL MAYER (CHINA) in Changzhou. This is where the new double raschel machine will celebrate its premiere.

The event begins on 13 October with the opening of the KARL MAYER GROUP's new showroom and, in addition to the new double raschel machine, has six other machine highlights and numerous textile innovations in store for visitors.

The newcomers HKS 3-M EL ECO and HKS 4-M EL ECO set new standards in the tricot market

Short development cycles, frequent pattern changes, and maximum efficiency – even with small batch sizes: Today's global fashion and apparel market demands more flexibility than ever before. High-performance warp knitting machines with compound needles (HKS) and EL pattern drive are KARL MAYER's answer to this challenge.

KARL MAYER celebrates 35 years of EL pattern drive

KARL MAYER is celebrating an anniversary this year: on 30 November 1990, the first warp knitting machine with electronic guide bar control, the KS 4 EL, was delivered – another milestone for patterning. As early as 1980, the SU gearbox with the MRS42SU had initiated the transition from mechanical chains to digital data.

India becomes growth engine for the warp knitting industry

ITMA ASIA 2025 exceeded all expectations for KARL MAYER – above all thanks to the strong interest from India: around 30% of the qualified discussions were held with partners from this traditional textile country. The response underlines the growing importance of the Indian market, which could become the second largest sales region for KARL MAYER after China. The warp knitting industry in particular is developing dynamically.

Solution for lower energy consumption proves itself in practice

Getzner Textil is one of KARL MAYER’s first customers to use PROSIZE with CASCADE. The innovative weaving specialist has tested the steam and condensation system by KARL MAYER and determined the energy savings it achieves. Karl-Heinz Vaaßen, Head of Textile Drying at KARL MAYER, assisted Getzner Textil’s production specialists both with the tests and with all questions relating to CASCADE. In a conversation with Werner Egger, Head of Weaving, and Thomas Rossi, Head of Warp Preparation at Getzner Textil, he learnt more about the system’s benefits for his customer.

Innovations for warp preparation at the cutting edge

At ITMA ASIA + CITME in October, KARL MAYER presented solutions for lower production costs and environmental impact and greater efficiency in the warp preparation sector. After the trade fair, the company can draw a positive conclusion, both in terms of the number of visitors and the quality of the discussions.

KARL MAYER Technische Textilien at ITMA ASIA + CITME - a presentation that opens up many opportunities

During ITMA ASIA + CITME 2024, KARL MAYER presented “Master the Change” solutions for numerous areas of the textile industry, including the technical textiles segment. At its stand in the Shanghai National Exhibition and Convention Center, the global player showed how the non-crimp fabrics from its highly productive composite machines can be used to exploit promising sales potential with lightweight construction applications.

Successful warp knitting machines and textile show to master the changes of our time

Warp knitting companies in Asia are also facing fundamental changes and challenges considering the tense global economic and geopolitical situation. During ITMA ASIA + CITME in October 2024, KARL MAYER showed how these can be mastered: with innovations that are primarily aimed at greater profitability, flexibility and sustainability.

Successful at ITMA Asia 2024 - Saurer's technology highlights

At ITMA Asia 2024, Saurer's new products were very popular and in the focus of visitor interest. Investment in new equipment seems to be on the rise and Saurer was positively surprised by the number and quality of visitors as well as the deals closed during the exhibition. Overall, visitors showed great interest in all the Saurer innovations designed to contribute to the future of textile technology and yarn production.

More safety and comfort for protective clothing thanks to auxetic fabrics

When everyday materials are pulled, they stretch or elongate in the direction of the pull and become narrower in cross-section. We can also observe this property in two-dimensional textiles. Auxetic structures behave differently here. They have the striking property of not changing under tensile stress or even increasing their width or thickness. These properties are advantageous, for example, in protective textiles or textile filter media. The DITF are researching auxetic fabrics for various applications.