LATEST DEVELOPMENTS OF THE ICOMATEX STENTER IC10-IC8: OPTIMIZE YOUR PROCESS

1.PRODUCTION OPTIMIZATION:
ICOMATEX has consolidated the Management and Yield Control ICPROD SOFTWARE.
ICPROD computerising system runs with a 15? colour touch screen installed on the front panel with access to all the main controls of the stenter.
By introducing the type of fabric, ICPROD sets the stenter automatically. Every order and the operator are saved, the customer, the date and the time; therefore all the orders can be checked at any time, as well as all the other parameters. It is possible also to check per customer to know how much did we deliver through the stenter in a period of time.
The main parameters and points that can be controlled are the following:
-Inner technical process production details: Overfeeding, Temperatures per each chamber, working width per chamber, take out cylinder, speeds and so on.
-Configuration of great deal of recipes for different kind of processes
-On-line alarms
-Batch detailed Information and back-up choice
-Possibility of checking incidences
-Maintenance greasing management
-Yield graphics
An extra auxiliary touch screen unit is located at the exit of the machine to allow operation of all the main commands (temperature, working width, speed, overfeed, take out cylinder, burners, etc). This extra screen avoids also stops of the line due to computer casualties.
ICPROD offers the choice to incorporate IC-REMOTE. This system allows the technical assistance through the telephone line or internet without need of travelling. This computerising configuration can be connected to all ICPROD stenters.
The ICPROD ICOMATEX is a useful tool for the control and the management of the process yield, as well for the insurance of the Quality Control and Management. And the IC-REMOTE is the ideal solution for obtaining a Total Control over the stenter during the 24 hours of the day and during the 365 days of the year and in any place of the world. 2.QUICK MAINTENANCE:
To explain the concept in a few words: ICOMATEX stenter avoid the use of electronic cardboards. The electronic conception of the machine gives under request the possibility to the customer to avoid the use of any electronic card. This avoids to the minimum the problems due to electronic faults with difficult solutions. Thanks to its design the customer can have a total knowledge of the machine and ensure a quick post-sales service where the majority of the elements can be found in any local shop of the country where the stenter is working.
On the whole, we conclude that ICOMATEX stenters, for finishing fabrics treatment, helps: to obtain physical improved fabric properties, better and bigger yield control and management of the output and the efficiency, and making easy and practicable the ?life? around the machine. It represents an evolution for any company and factory to achieve the maximum benefit and profitability of the done investment.
_____________
contact:
David Valmaña, Director
ICOMATEX
C/Cinca 34
082233 Terassa (Barcelona) Spain
Tel:+34 937853443
Fax:+34 937862260
www.icomatex.com