[pageLogInLogOut]

#Recycling / Circular Economy

Project Re:Claim wins Plastics Industry Award 2024

The joint venture between the Salvation Army Trading Company (SATCoL) and Project Plan B, known as Project Re:Claim, uses an ISEC evo system from PURE LOOP to process used garments and textiles. The project, supported by the EREMA Group, represents Europe’s first commercial scale polyester textile recycling system.
In the picture from left: Zoe Lyons, British Comedian, George Barnett, Site Manager at SATCoL, Manfred Dobersberger, Managing Director of PURE LOOP, Mark Richardson, Sales Manager at Eurograv, James Holmes, Production Director at Plan B, James Stanton, Commercial Director of Distrupol © 2024 PureLoop
In the picture from left: Zoe Lyons, British Comedian, George Barnett, Site Manager at SATCoL, Manfred Dobersberger, Managing Director of PURE LOOP, Mark Richardson, Sales Manager at Eurograv, James Holmes, Production Director at Plan B, James Stanton, Commercial Director of Distrupol © 2024 PureLoop


On 22 November, the prestigious Plastics Industry Awards ceremony was held in London, UK. Project Re:Claim was recognised in the “Recycler of the Year” category. The partner companies accepted the award together with great enthusiasm.

Manfred Dobersberger, Managing Director of PURE LOOP, said: „We are incredibly proud of this recognition, which once again proves that going the extra mile truly pays off. The PURE LOOP team believed in taking new paths, and now we are being rewarded with this award. It’s a well-deserved acknowledgment of the hard work and determination our team has shown. Project Re:Claim is a true example of how successful collaboration between companies can drive forward textile recycling. I’m eager to see where this journey will take us.”

James Holmes, Production Director at Plan B, said: "We are thrilled to receive this prestigious award, which underscores the dedication and innovation that Project Plan B brings to the table. The success of Project Re:Claim is a testament to the power of collaboration and the relentless pursuit of sustainability. Our team at Plan B, in partnership with SATCoL and PURE LOOP, has worked tirelessly to create a groundbreaking recycling system that addresses the pressing issue of textile waste. This recognition motivates us to continue pushing the boundaries of what is possible in textile recycling. We are excited about the future and the positive impact we can make on the environment.”

Project Re:Claim is the first recycling system for textile polyester in Europe, specialising in post-consumer and post-industrial textiles. Further information about the project can be found in the PURE LOOP press release dated 7 November 2024: 

https://www.pureloop.com/


More News from PureLoop

#Recycling / Circular Economy

DynaShape® boosts productivity by ten percent

The more precisely the machine parameters can be matched to the input material, the higher the throughput and better the quality. PURE LOOP developed DynaShape® as an intelligent automation solution for the ISEC evo recycling machine to optimise settings on its own and maintain a consistent recycling process even when the feed material changes.

#Recycling / Circular Economy

Europe’s first polyester textile recycling system realised with PURE LOOP’s ISEC evo

Project Re:Claim, a joint venture between the Salvation Army Trading Company and Project Plan B, has been nominated for the Plastics Industry Awards 2024 in the "Recycler of the Year" category. Using an ISEC evo system from PURE LOOP to process used garments and other textiles, the project is Europe’s first polyester textile recycling system.

More News on Recycling / Circular Economy

#Research & Development

ALADIN paves the way for circular and demand-driven textile production in Europe

Textile production can be organized sustainably by utilizing short supply chains and preventing overproduction. This can already be achieved today by intelligently connecting and efficiently utilizing existing infrastructure. At the same time, production becomes circular when innovative technologies and materials are used that enable high-quality recycling. The ALADIN research project, launched in May 2026 and co-funded with five million euros under the EU Horizon Europe program, is creating the conditions for this.

#Recycling / Circular Economy

Ence and ShareTex begin initial testing of the ATENEA innovation project to promote textile recycling in Spain

Ence and ShareTex are making progress on the Atenea R&D project, which aims to develop a complete value chain for textile recycling in Spain. Specifically, the goal of the ATENEA project—which is funded by the Center for Technological Development and Innovation (CDTI)—is to connect all the necessary stages for the recovery of textile waste, from collection and management, through recycling and transformation into new raw materials, to their incorporation into new textile products.

#Recycling / Circular Economy

DePoly Inaugurates its Showcase Plant in Monthey Switzerland

What if used plastic bottles, PET packaging material and polyester textiles could become raw materials just as high performing as virgin resources? That is the ambition of DePoly, a circular materials company based in Sion, Switzerland which inaugurated its Showcase Plant in Monthey on July 6th & 7th. The first depolymerization facility of its kind and scale in Switzerland, this industrial Showcase Plant represents a major milestone in the company's growth and its journey toward commercialization.

#Recycling / Circular Economy

Commission clarifies rules on plastic bottles recycling

The European Commission today adopted new rules on recycling of single-use plastic beverage bottles made primarily of polyethylene terephthalate (PET bottles). These rules establish, for the first time, a methodology to calculate, verify and report chemically recycled content. This is part of the Commission’s December 2025 plastics package.

Latest News

#Textile processing

YKK develops concept EXCELLA® zipper tape using nonwoven fabric partially derived from used clothing

YKK Corporation has developed a concept version of its premium EXCELLA® zipper series made from nonwoven fabric sheets created by fiberizing used clothing and other textile materials. Based on a proposal by fashion designer Yuima Nakazato, this item was created as a result of collaboration between Nakazato, Seiko Epson Corporation and YKK. The concept zipper was incorporated as a material component for pieces in the newest YUIMA NAKAZATO Couture Collection, “INFERNO,” which was unveiled in Paris, France on July 8, 2026.

#Textiles & Apparel / Garment

Texworld Apparel Sourcing Paris highlights evolving global sourcing landscape

From 31 August to 2 September 2026, Texworld Apparel Sourcing Paris will bring together more than 1,000 international exhibitors at Paris-Le Bourget Exhibition Centre. This edition reflects the new global balance of textile and apparel sourcing, highlighting a strong diversity of sourcing countries — some unexpected.

#Textile processing

Dedicated car seat model of SHIMA SEIKI’s P-CAM® R Cutting Machine unveiled

Leading Japanese textile solutions provider SHIMA SEIKI MFG., LTD. of Wakayama, Japan, showed a special version of its P-CAM® R multi-ply computerized cutting machine dedicated to the production of car seats for the first time, at a private exhibition held over two days on Thursday, July 2nd and Friday, July 3rd at the Kariya City Industrial Promotion Center in Aichi Prefecture.

#Nonwovens

Katharina Obergruber appointed to the Management Board of Sandler AG

The Supervisory Board of Sandler AG has appointed Katharina Obergruber to the company’s Management Board. Effective September 1, 2026, the Board will consist of Philipp Ebbinghaus (CEO), Dr. Ulrich Hornfeck (currently CCO, future COO), and Katharina Obergruber (CCO). Katharina Obergruber, currently Chief Sales Officer Hygiene and member of the Management Team of Sandler AG, will assume responsibility for all sales activities as Chief Commercial Officer. She will assume this role from Dr. Ulrich Hornfeck, who will focus primarily on production and supply chain topics.

TOP