[pageLogInLogOut]

#Nonwovens / Technical Textiles

Even more sustainable: Freudenberg presents Evolon® made from post-consumer recycled PET

© 2021 Freudenberg
With Evolon® RE, Freudenberg Performance Materials (Freudenberg) is now offering its customers an even more sustainable version of its high-performance microfilament textiles. Evolon® RE is manufactured from an average of 70% recycled polyester, which the company makes by recycling post-consumer PET bottles in-house. Evolon® RE is available for various applications, including high-tech wiping and technical packaging, in weights currently ranging from 80g/sqm to 300g/sqm.

Evolon® RE offers the same high and constant quality as all other Evolon® textiles. This applies to mechanical and textile properties as well as to filtration, cleaning and protection properties.

The use of recycled materials in the demanding production of Evolon® textiles without sacrificing product performance underlines Freudenberg´s technological know-how, as Jean-Francois Kerhault, Business Segment Manager Evolon, explains: “We have more than 20 years of experience with Evolon® technology. Our technical teams are real experts in this demanding process, and it is thanks to their knowledge that we were able to overcome the challenge of integrating recycled PET from post-consumer bottles into our products."

Recycle, but also reuse and reduce

Evolon® fabrics are very durable in most applications. The products are washable and re-usable and a very good substitute for disposable solutions. For example, high-tech Evolon® cleaning cloths offer an unrivalled cleaning performance even after hundreds of washings. Technical packaging materials can be reused throughout the entire production program of a car model. What is more: Evolon® fabrics are lightweight, which saves raw materials compared to most existing conventional products.



Constant drive toward ever-greater sustainability

Since Evolon® was launched in 1999, Freudenberg has continuously increased the sustainability of both the product and its production process. For example, no solvents or chemical binders are used during the manufacture of Evolon®. In 2003, the company set up an internal reprocessing system for hydroentanglement water and was an early adopter of ISO 50001 in 2012. Thanks to its certified energy management system, Freudenberg is also able to continuously reduce its CO2 emissions. The production of Evolon® from post-consumer recycled polyester represents a new milestone in the efforts to increase sustainability.

Recycling pioneer Freudenberg

Freudenberg was one of the first companies in Europe to recycle used PET bottles, beginning in the early 1990s. Today, the company utilizes around 7 million PET bottles a day in the manufacture of polyester nonwovens.

By recycling PET bottles, Freudenberg is utilizing waste as a raw material. On the one hand, this helps to reduce the burden of landfilling and incineration. On the other, replacing primary raw materials by recycled polyester of the same quality saves natural resources. It also reduces energy consumption, resulting in less CO2 emissions, waste and waste water.



More News from Freudenberg Group

#Techtextil 2026

Freudenberg Performance Materials presents Mehlerheytex and Filc at Techtextil 2026

Freudenberg Performance Materials will showcase textile innovations that increase efficiency, performance and sustainability in industry and mobility at Techtextil 2026. For the first time since the merger of Mehler Texnologies and Heytex, the MehlerHeytex brand will make its debut as a leading expert in coated technical textiles. Moreover, Freudenberg Performance Materials Filc (Filc), specialist for advanced needlepunch nonwovens and laminated materials, will present its groundbreaking solutions for automotive applications. Filc customers can benefit from the perfect combination of functionality, comfort and sustainability. The Freudenberg Performance Materials experts are looking forward to welcoming visitors to the trade fair at Stand A11 in Hall 11.0 from April 21 – 24, 2026.

#Nonwovens

Freudenberg accelerates local production for apparel market by expanding its site in India

Freudenberg Performance Materials Apparel (Freudenberg Apparel) celebrates the grand opening of a major expansion at its manufacturing facility in Chennai, India, on October 14, adding 20,000 square feet of production space and introducing new production lines tailored to the Indian apparel market. This strategic investment is aimed at significantly reducing lead times and enhancing the availability of high-quality, locally produced interlinings for the fast-evolving apparel sector in India and South Asia.

#Nonwovens

Freudenberg Performance Materials publishes first Sustainability Report

With the publication of its first sustainability report, Freudenberg Performance Materials has reached a major milestone on its path toward greater environmental responsibility and corporate transparency. Until now, information about the company’s sustainability performance was only included in the sustainability report of its parent company, the Freudenberg Group. The newly released report, however, focuses specifically on the business of technical textiles.

#Nonwovens

Freudenberg to exhibit for the first time at CAMX 2025

Freudenberg Performance Materials (Freudenberg) will be exhibiting for the first time at CAMX 2025 in Orlando, Florida, from September 9-11. This presence is a strong signal from the leading global supplier of technical textiles to support the North American composites industry with high-performance surfacing veils, flow media and spacers. Visitors can meet Freudenberg experts at booth D69 on the show floor.

More News on Nonwovens / Technical Textiles

#ITMA Asia + CITME Singapore 2025

ANDRITZ sets focus on textile recycling and durable nonwoven production technologies at ITMA Asia 2025

International technology Group ANDRITZ will be presenting its innovative nonwovens production and textile solutions at ITMA ASIA + CITME 2025 in Singapore, from October 28 to 31, 2025 (Hall 2, D106). ANDRITZ will showcase its MMCF production plants, textile sorting and recycling, bast fiber processing, needlepunch, airlay, and life-cycle service technologies, with a focus on sustainable solutions. Discover how these innovations can grow your business opportunities and support a greener future.

#ITMA Asia + CITME Singapore 2025

Dilo Group at ITMA ASIA Singapore 2025

At ITMA ASIA Singapore, the Dilo Group will exhibit at Booth No. H2 – D202. Together with Kansan Materials, Izmir, the company will present its latest developments and looks forward to welcoming visitors to exchange ideas and explore innovations in needling technology.

#Nonwovens

OUTLOOK™ 2025: Charting a sustainable and innovative future for the Nonwovens Industry

EDANA concluded its flagship event, OUTLOOK™ 2025, last week, marking it as a major success and addressing the biggest questions facing the industry. The three-day conference highlighted the urgent need for a unified approach to sustainability, regulation, and innovation in the absorbent hygiene and wipes sectors.

#Nonwovens

Global Nonwovens Alliance unveils Inaugural Board, advancing collaboration and growth worldwide

The Global Nonwovens Alliance (GNA), a tax-exempt federation jointly founded by INDA, the Association of the Nonwoven Fabrics Industry, and EDANA, the Voice of Nonwovens, announces the appointment of its founding Board of Directors. This group of leaders represents some of the most influential executives across the nonwovens value chain and reflects GNA’s mission to foster global collaboration, innovation, and growth in the industry.

Latest News

#Dyeing, Drying, Finishing

Ferraro S.p.A. acquires the “Finishing” business unit of Cibitex S.r.l.

Ferraro S.p.A. and Cibitex S.r.l. are pleased to announce the completion of the agreement pursuant to which Ferraro S.p.A. has acquired the “Finishing” business unit of Cibitex S.r.l., specialized in the development and manufacturing of technological solutions for textile finishing.

#Recycling / Circular Economy

Reju opens its first R&D Center in the U.S. in Conshohocken, Pennsylvania

Reju, the company specializing in textile regeneration, today announced the opening of a Research and Development (R&D) Center in Conshohocken, Pennsylvania, the company's first proprietary research center in North America. Located within Technip Energies' existing Advanced Materials and Catalysts research center, the lab will allow Reju to accelerate the rollout of its recycling technologies and develop its next-generation circular solutions.

#Weaving

Itema reaffirms its commitment to the Syrian textile industry at NasTex 2026

From July 18th to 21st, Itema will exhibit at NasTex at the Damascus Fairground (Hall 11 – Stand C02), marking its return to one of the Middle East’s historically significant textile markets. Itema will showcase advanced weaving technology designed to support the competitiveness and technological evolution of Syrian manufacturers and announces a new partnership with Growfast Agency as the sole agent of Itema in Syria.

#Knitting & Hosiery

KARL MAYER's HKS 2-SE Expands Possibilities for Premium Stretch WARP KNITS

Warp knitted fabrics with a woven look are more in demand than ever in the fashion and apparel industries. Stretch WARP KNITS, in particular, impress with their freedom of movement, breathability, and virtually wrinkle-free wear – thereby opening up new style worlds such as smart casual or business casual. When it comes to the highly efficient production of premium-quality stretch WARP KNITS, the HKS 2-SE has long been the machine of choice. KARL MAYER’s best-selling tricot machine produces standard elastic fabrics characterized by high gauges, smooth, delicate surfaces, and a soft hand feel.

TOP