[pageLogInLogOut]

#Natural Fibers

Fashion For Good launches “Beyond50 Denim” to address hemp integration barriers in global denim production

Fashion for Good, together with leading global brands BESTSELLER, C&A, PDS Limited, Reformation, and Target, launched Beyond50 Denim: Combining Cottonised Hemp and Green Chemistry, a project accelerating the use of hemp as an alternative to conventional cotton in denim. By combining two pioneering innovations (SEFF’s Nano-Pulse™ cottonised hemp fibres and FIBRE52™’s proprietary chemistry formulations with soft handfeel), the project seeks to demonstrate that hemp-based denim can match or even surpass cotton in both performance and appeal.
© 2025 Fashion for Good
© 2025 Fashion for Good


The global denim market is projected to surpass USD 115 billion by 2029¹, yet its growth is tied to conventionally cultivated cotton – a fibre which carries a considerable environmental burden. While cotton is valued for its inherent softness and cost-effectiveness, the conventional methods of its cultivation are notably resource-intensive. These often involve substantial water and pesticide inputs, contributing to a heavy global environmental footprint and social impact across the entire production chain. Such impacts raise pressing concerns about the fibre’s long-term sustainability.

Although hemp may offer a more climate-resilient alternative, requiring fewer resources and improving soil health, its integration into denim has been limited. Typically, total hemp content in denim does not exceed 20%, due to challenges in achieving the desired handfeel and aesthetic criteria demanded by consumers. This limitation can necessitate a challenging trade-off across performance, price, and environmental impact parameters. These factors have collectively contributed to the limited adoption of hemp as a mainstream fibre in denim.

To address these challenges, Fashion for Good has launched the “Beyond50 Denim: Combining Cottonised Hemp and Green Chemistry” project, bringing together brands BESTSELLER, C&A, Reformation, PDS Limited, and Target, innovators SEFF and FIBRE52™, and manufacturers Bossa (Turkey) and Nice Denim (Bangladesh).

“Our goal at Reformation is to help drive the kind of innovative solutions that have the potential to transform fashion. Beyond50 Denim is a chance to really put promising solutions like hemp and green chemistry to the test: to learn, validate, and hopefully help open the door for a more sustainable future for denim.” Carrie Freiman Parry, Senior Director of Sustainability at Reformation.

The project will validate the synergistic integration of two innovations: SEFF’s Nano-Pulse™ technology transforms raw hemp into refined, cotton-like fibres that are easier to spin and integrate into fabrics, while FIBRE52™’s unique chemistry solution can impart a softer handfeel to cellulosic fibre-based fabrics.

“Hemp’s limited adoption in denim production reveals how entrenched industry practices can systematically prevent transformative innovations from reaching their potential”, says Katrin Ley, Managing Director at Fashion for Good. “With Beyond50 Denim, we aim to demonstrate that overcoming these barriers requires more than isolated technological advances. By strategically combining breakthrough fibre technology with green chemistry, the project shows how different innovations can work together to tackle long-standing challenges in the denim industry.”

By combining these two innovative technologies, the project aims to validate how hemp content can exceed 20% and reach 50% and beyond in denim applications while maintaining performance parity with conventional cotton. Through this approach, the project seeks to demonstrate that hemp can meet or surpass the functional and aesthetic benchmarks established by cotton, while simultaneously offering a more sustainable alternative for the denim industry.

Learn more about the project at this link:

https://www.fashionforgood.com/case-study/beyond-50-cottonised-hemp/


¹ Research and Markets. (2024). Denim Jeans Market Outlook, 2029.



More News from Fashion for Good

#Sustainability

Closing the Footwear Loop reveals challenges and opportunities for circular footwear

The footwear industry faces one of the most complex circularity challenges in the fashion sector. A new Phase 1 report from the Fashion for Good initiative Closing the Footwear Loop, developed together with Circle Economy, provides new insights into the composition, condition and recycling potential of post-consumer footwear waste.

#Recycling / Circular Economy

Project REWEAR investigates diverse economies of rewear as a global practice of circularity

Every year, European households discard millions of tonnes of clothing. Around a quarter of what gets separately collected is exported, much of it classified as rewearable. A significant share ends up in markets like Kantamanto in Accra, Ghana, where an estimated 15 million garments arrive every week. New research published today reveals what happens when that clothing arrives.

#Recycling / Circular Economy

Solving the Feedstock Gap: Unlocking Post-consumer Feedstocks for Textile-to-Textile Recycling in Europe

Fashion for Good launches Project FAE (Feedstock Activation Europe) to develop the sorting and pre-processing infrastructure needed to channel non-rewearable post-consumer textiles into textile-to-textile (T2T) recycling at scale. The project is a practical response to one of the most pressing problems in textile circularity: making post-consumer waste a viable, commercially competitive raw material for recyclers.

#Raw Materials

Fashion for Good mobilises industry to adopt mass balance attribution and accelerate decarbonisation

Fashion for Good launches today the Mass Balance Demonstrator project, a collaborative industry initiative to implement and scale the mass balance attribution (MBA) chain-of-custody model for biomass-attributed PET in textile applications. The project represents a concrete step toward accelerating brand-driven decarbonisation across the apparel value chain.

More News on Natural Fibers

Latest News

#Spinning

New spinning package with two-step filtration for recycled yarns and more

At the ITM in Istanbul, BB Engineering unveiled its new, patented ValuePack spinning package for the first time, which features a two-stage filtration system. This is particularly beneficial for re-cycling processes. Until now, spinning packs have used either metal powder (“sand”) or filter candles as filter media. Both options are suitable for differ-ent applications, and each has its own specific advantages and dis-advantages.

#ITMA 2027

ITMA 2027 gains strong momentum

In line with the theme "Co-creating the future of textiles", ITMA continues to strengthen its support for start-ups, recognising their role in driving innovation and shaping the future of textile and garment manufacturing. Through the Start-Up Valley, emerging companies gain access to a global marketplace where they can connect with industry leaders, potential partners, investors and customers.

#ITM 2026

Positive market signals for KARL MAYER at ITM 2026

KARL MAYER is pleased with its participation as an exhibitor at ITM 2026. Faced with the challenges of rising domestic costs and fierce competition from low-priced Asian markets, the industry leader had traveled to Istanbul with mixed feelings – yet still draws a really positive conclusion.

#Associations

Mongolia: Workshop on Italian textile technologies kicks off in Ulaanbaatar

The workshop dedicated to Italian textile technologies will kick off in Ulaanbaatar from 21 to 23 June 2026. Focused on the most advanced innovative solutions for the textile industry, the initiative will bring together 13 Italian textile machinery manufacturers, confirming the growing interest in strengthening industrial cooperation between the two countries and highlighting Mongolia’s strategic importance for Italian textile machinery producers.

TOP