[pageLogInLogOut]

#ITMA 2019

Mimaki Hybrid Printer Demonstration at ITMA 2019 Emphasises Accessibility of Textile Printing

The hybrid digital textile printer achieves unparalleled flexibility in ink combinations and substrate options­­ (c) 2019 Mimaki
Mimaki Engineering, a leading manufacturer of inkjet printers and cutting systems, today announces the first global technology demonstration of a brand-new hybrid digital textile printer from the TX300P series at ITMA 2019 (Barcelona, Spain, 20-26 June, Booth B110, Hall 3). Uniquely featuring both direct-to-textile and direct-to-transfer print capabilities, the new printer achieves unparalleled flexibility in ink combinations and substrates – opening new profitable opportunities for businesses.
  • New hybrid printer enables direct-to-textile or direct-to-transfer printing on entry-level printer
  • Flexibility of press enables smaller print service providers to broaden applications and enter new markets

The new printer is an evolution of the Mimaki TX300P-1800, with the added capability of printing direct-to-transfer. Crucially, print service providers will benefit from enhanced versatility in terms of fabrics, applications and targeted markets. This affords smaller print service providers with an opportunity to provide a full range of textile printing applications with just one system. Aligned with Mimaki’s Total Solution Provider approach, the printer is compatible with Mimaki’s full range of pre-treating, steaming and washing equipment.

“The textile market is still relatively early-on in the adoption of digital printers, with most textiles being printed in the conventional way and a lot of large players dominating the market. With this new hybrid printer, Mimaki has provided an affordable solution that lowers the barriers to entry for smaller print providers,” says Ronald van den Broek, General Manager Sales EMEA. “For larger volume production houses, the printer is valuable for smaller runs and the myriad benefits digital production provides.”

Interchangeable platens enable the hybrid nature of the printer. When printing direct-to-textile, excess ink that penetrates through the fabric is drained by a platen with an ink-receiving ditch. This can quickly be swapped out for a vacuum platen, suitable for printing onto heat transfer paper.


The new printer, which is an evolution of the Mimaki TX300P-1800, is on display at ITMA 2019 (c) 2019 Mimaki
The new printer, which is an evolution of the Mimaki TX300P-1800, is on display at ITMA 2019 (c) 2019 Mimaki


The printer can also be configured with three different ink combinations, comprising textile pigment/direct sublimation or textile pigment/sublimation transfer or direct sublimation/sublimation transfer. This means more versatility and more possibilities, making it an ideal entry model.

Reliable productivity is assured with Mimaki Core Technology including a Nozzle Check Unit and Nozzle Recovery System. This enables the printer to automatically clean print heads when nozzles malfunction, and when nozzles are not repairable, switch any missing or damaged nozzles with working nozzles without stopping production and without affecting final print quality. An adjustable head gap also means the distance from print head to substrate can be changed preventing print heads from touching substrates.

“The features of this new hybrid printer will enable textile and garment manufacturers to achieve unparalleled flexibility and enhanced application opportunities for increased business growth. With this product Mimaki is effectively democratising accessibility to textile printing, and with solutions like this in the market, we expect to see improved growth of digital printing in textiles,” van den Broek concludes.


More News from Mimaki Europe B.V.

#Digital Printing

Mimaki takes DTF performance to the next level with TxF300-75Plus

Mimaki Europe, a leading manufacturer of industrial inkjet printers and cutting plotters, announces the TxF300-75Plus, an upgraded model within its high-productivity direct-to-film (DTF) printing portfolio. Following on from the success of the original TxF300-75, this enhanced version reflects Mimaki’s commitment to continuously evolving its solutions to meet the changing demands of the market.

#Digital Printing

Keeping print inclusive: Empowering women in the print industry

Across all industries, cultivating a diverse and inclusive workplace is increasingly recognised as valuable and essential to long-term success. However, despite the print industry’s significant advancements in technology and innovation, visible representation of women remains limited. As the sector grapples with low recruitment, it’s important to challenge outdated perceptions. Creating real change, however, requires collective effort - no single company can do it alone.

#Digital Printing

Express Print boosts production using an expanded fleet of Mimaki technologies

Express Print, a fast-growing Bulgarian provider of visual communication and soft signage solutions, has significantly enhanced its production workflow with a comprehensive portfolio of Mimaki digital printing systems. Based in Varna and active for more than 10 years, the company maintains a strong focus on the advertising sector. Over the years, it has steadily expanded its operations, driven by a clear vision to bring the full spectrum of large-format printing services in-house, avoiding outsourcing and ensuring complete control over production quality.

#Digital Printing

Erreà upgrades sportswear printing operations with seven high-performance Mimaki digital textile printers

Mimaki Europe, a leading manufacturer of industrial inkjet printers and cutting systems, has supported renowned Italian sportswear brand, Erreà in upgrading its digital textile printing operations with the installation of seven high-performance Mimaki systems. The new installation includes three Tiger600-1800TS industrial dye-sublimation printers and four TS330-1600 solutions, replacing a previous fleet of 28 digital printers. This major upgrade marks a significant step forward in Erreà’s production strategy, enabling the company to streamline its printing infrastructure while improving efficiency, colour consistency and overall production control.

More News on ITMA 2019

Latest News

#Techtextil 2026

SAHM Winding Solutions and Vandewiele Automation present integrated automation solution for winding processes

For the first time at the Techtextil trade fair in Frankfurt am Main, Germany (21 - 26 April), SAHM Winding Solutions (Hallo 12.0. / Booth 95) and Vandewiele Automation will be showcasing their combined automation expertise for industrial winding processes. Under the motto “Combining Automation. Maximizing Flow”, the two companies will demonstrate how automated package handling and robot-assisted yarn knotting can be integrated into a continuous production flow.

#Recycled Fibers

UNIFI celebrates recycled and circular Innovation with ninth annual REPREVE® Champions of Sustainability Awards

Unifi, Inc. (NYSE: UFI), the makers of REPREVE® and one of the world’s leading innovators in recycled and synthetic yarns, today announced the winners of its ninth annual REPREVE Champions of Sustainability Awards, recognizing brands and mills that are advancing circularity and responsible manufacturing across the global textile industry.

#Man-Made Fibers

Teijin Frontier announces new Stretch Polyester yarn offering exceptional compatibility with high-performance Polyester materials

Teijin Frontier Co., Ltd. announced today that it has developed a new stretch polyester yarn that offers new opportunities to create comfortable, all- polyester fabrics for sports and outdoor wear. The new polyester yarn demonstrates exceptional compatibility with high-performance polyester materials. Further, Teijin Frontier’s proprietary polymer design and spinning technology impart excellent elasticity to the new yarn. In turn, this yarn adds stretchability and recovery to the advanced functionality and excellent texture of high-performance polyester materials.

#Man-Made Fibers

Lenzing commissions 14 MW power‑to‑heat facility, strengthening grid stability and heat management

The Lenzing Group has successfully commissioned a new power‑to‑heat (P2H) facility with an electrical capacity of 14 megawatts. The installation converts renewable electricity directly into process heat, is fully integrated into the existing heat network at the industrial site, and represents a key building block for a fossil‑free heat supply. As project partner, VERBUND was responsible for the energy‑market integration and will operate the facility for balancing energy marketing, enabling it to respond flexibly to short‑term fluctuations in the power grid.

TOP