[pageLogInLogOut]

#ITMA 2019

Rieter at ITMA 2019 in Barcelona

At ITMA 2019, Rieter showcases innovations for all four spinning processes that are established on the market. These innovations are designed to reduce raw material, energy and labor costs, while also increasing productivity during production of the yarn quality required in each case. Solutions to increase the flexibility of the spinning mill are also presented. In addition, Rieter presents two solutions for the production of innovative yarns.
  • News from the inventors of compacting
  • The most economical rotor direct process
  • Production of innovative yarns using the air-jet spinning process • ESSENTIAL: New modules of the Rieter Digital Spinning Suite
  • After Sales: Solutions for optimizing the installed basis
  • Innovations from Bra?cker, Graf, Novibra, SSM and Suessen


Fiber preparation

The blowroom VARIOline with the new UNIClean B 15 brings significant improvements in terms of energy consumption and the cleaning result for all spinning processes. The same applies to the new high-performance card C 80, which offers an unrivaled level of productivity.

Ring and compact-spinning process

To increase the cost effectiveness of the ring spinning and compact spinning process, Rieter reveals the new comber E 90, the new roving frame F 40, the piecing robot ROBOspin and three different compacting units that can easily be installed on and removed from a ring spinning machine: COMPACTdrum, COMPACTapron and COMPACTeasy.

Rotor spinning process

Innovations that bring considerable improvements in efficiency for the rotor spinning process are also presented. The draw frame module RSB-Module 50 can be used in combination with the high-performance card C 80 and can be configured to a highly efficient direct process with the new semi-automated R 37 or the fully automated

R 70. The new, cost-effective rotor spinning machines are characterized by low energy consumption, high productivity and high machine availability with low raw material costs.

Air-jet spinning process

There are innovations for the air-jet spinning process too: The process for producing a very attractive yarn made of 100% combed cotton is presented. At the Rieter booth, let yourself be convinced that this process is extremely cost-effective, despite the combed out short fiber content.


ESSENTIAL – Rieter Digital Spinning Suite

The new innovations for the four spinning processes are supplemented by two new functionalities of ESSENTIAL: ESSENTIALorder and ESSENTIALconsult, which are available to all Rieter customers free of charge with the purchase of a new machine. In addition to the existing modules ESSENTIALmonitor, ESSENTIALmaintain and ESSENTIALpredict, the next steps are demonstrated: ESSENTIALlab for integrating laboratory data into the spinning mill management system, ESSENTIALoptimize, the intelligent recipe management system, and ESSENTIALautomate for integrating the transport and logistics systems.

After Sales

The growing digital service offering complements new solutions for optimizing the installed base. With the PSM Drafting Motor, Rieter After Sales offers a significant improvement on the machines G 33 and K 44; and with the Energy Saving Support Disc it offers the possibility to make considerable energy savings on rotor spinning machines.

Bra?cker, Graf, Novibra, SSM and Suessen

The Rieter Group’s component manufacturers also introduce further innovations for day-to-day operations, such as the Bra?cker ring traveler C1 ELM udr and the new SOLIDRING B 188 from Suessen. In preciforce, SSM presents a system for optimizing the bobbin build-up on precision winding machines. SSM also reveals another yarn innovation: fancyflex is a technology for manufacturing slub yarn for textured yarns.

Visit us at ITMA 2019 in Barcelona (Fira de Barcelona, Gran Via) from June 20 to 26, 2019. See for yourself the numerous advantages on offer from Rieter in hall 6 at booth C 201.

Detailed information on Rieter’s innovations and access for downloading the Rieter images are available online at http://www.rieter.com


More News from Rieter Textile Systems

#Spinning

Georg Stausberg, a veteran of the textile machinery industry, takes over as Rieter Group CEO

Georg Stausberg, one of the most experienced executives in the international textile machinery industry, has been appointed Chief Executive Officer of the Rieter Group with immediate effect from 4 November 2026. With more than three decades of industry experience and a long-standing leadership career at Barmag, Stausberg brings extensive technological expertise, international market knowledge and an established network across the global textile industry to his new position.

#Spinning

Rieter reports higher sales and order intake but lowers 2026 earnings outlook

Rieter achieved an order intake of CHF 951.4 million in the first nine months of 2026 (2025: CHF 559.3 million), up 70.1%. This growth is attributable to the first-time consolidation of the Man-Made Fiber Division. On an organic basis, order intake was 10.5% lower than the previous year.

#Spinning

Rieter appoints Daniel Lippuner as new CEO as Thomas Oetterli steps down

Thomas Oetterli has decided to step down from his function as CEO, effective October 31, 2026, and hand over the Chairmanship of the Board of Directors. “After the successful implementation of the Next Level performance program, the structural measures initiated to consolidate the sites and the acquisition of Barmag, the time has come to hand over responsibility to new hands,” explains Thomas Oetterli.

#Spinning

Rieter prepares leadership transition in Components & Technology

Roger Albrecht, Head of the “Components & Technology” Division, has decided to pursue a new opportunity outside the Rieter Group. Roger has worked for the Group for 11 years and has been instrumental in maintaining Rieter’s position as a technology leader in the short-staple business.

More News on ITMA 2019

Latest News

#Textile processing

YKK Bangladesh celebrates 25 years of fastening production and business development

YKK Bangladesh Pte. Ltd., a subsidiary of Japanese fastening manufacturer YKK Corporation, has celebrated its 25th anniversary with a commemorative ceremony in Dhaka on November 8, 2026. Since its establishment in November 2000, the company has expanded its manufacturing capacity and business operations alongside the growth of Bangladesh's apparel industry.

#ITMA Asia + CITME 2026

Murata Machinery to showcase AIcone winding and high-speed VORTEX spinning at ITMA ASIA 2026

Japanese textile machinery manufacturer Murata Machinery will present its PROCESS CONER AIcone automatic winder and VORTEX 870 EX spinning machine at ITMA ASIA + CITME 2026. Under the theme “Right Choice, Bright Future”, the company will highlight technologies for efficient yarn manufacturing, combining energy-saving winding solutions with high-speed air-jet spinning. Visitors can meet Murata Machinery in Hall 5, Booths E01 and E02.

#ITMA Asia + CITME 2026

DORNIER highlights airbag, filtration and composite weaving technologies at ITMA ASIA 2026

Lindauer DORNIER will present its latest developments in air-jet and rapier weaving technology for technical textiles at ITMA ASIA + CITME 2026. The German machinery manufacturer will focus on the reliable and efficient production of airbag fabrics, high-density filters and reinforcement textiles for fibre-reinforced composites. Alongside its A2 air-jet and P2 rapier weaving machines, DORNIER will highlight its TRITOS FLEX technology for complex 3D composite preforms, retrofit solutions and expanded service capabilities in Asia. The company will exhibit in Hall 3, Stand E02.

#Retail & Brands

Marks & Spencer expands across Asia Pacific through partnership with Global Fashion Group

Marks & Spencer (M&S) and Global Fashion Group (GFG) have announced a strategic partnership to expand the British retailer's fashion business across Asia Pacific. M&S has launched on Southeast Asian fashion platform ZALORA and plans to enter THE ICONIC in Australia and New Zealand in early 2027. The agreement also introduces regional fulfilment for Australian M&S.com orders, enabling faster deliveries and returns while supporting a capital-light international growth strategy.

TOP