#Digital Printing

2020-04-30

Durst produces “community masks” at Brixen headquarters

Durst, manufacturer of advanced digital printing and production technologies, is now producing “community masks” in its demo center at the Brixen headquarters in South Tyrol, Italy. The masks are produced in the first step for employees of Durst Group and sister company Alupress and afterwards the production capacity will also be available for other companies. The know-how for the production of the “community masks” will be made available to interested print service providers worldwide through its branches.

"At the beginning of April, our printing technologies for the label and packaging industry were classified as systemically relevant and we were able to go back into partial operation," said Christoph Gamper, CEO and co-owner of Durst Group. "Now we will also use our textile printing and processing systems, which are located in the demo center for customer demonstrations, for the production of "community masks". In line with our "pixel-to-output" strategy, production takes place digitally and fully automatically: in a web shop with a specially programmed editor, the masks can be individualized with graphics, images, texts, and our workflow software then sends the designed file directly to the printing machine and then the printed material is processed by a cutting system. The announcement of our initiative on social media alone has generated great demand and print service providers worldwide are adapting our concept and thus Durst technology for their productions."

The "community masks" produced by Durst have a filter membrane that has a high filtration efficiency and at the same time is characterized by very good air permeability. The "community masks" have a 3-layer structure, the polyester fleece textile materials are comfortable to wear and washable, the filter membrane can be disinfected with alcohol and reused. Durst explicitly points out that this is not a protective equipment in accordance with VO (E) 2016/425 or a medical device in accordance with Directive 93/42 / EEC.

Durst has many years of experience with filter systems, as these take on a type of "cleaning function" in the printing press to filter out microparticles in the ink supply systems so that the print heads do not become clogged and are always ready for use. The filter membrane selected by Durst Development for the "community masks" was subjected to a detailed effectiveness test in the Durst laboratories and Durst will also have the measured values ??verified by an independent institute.

“VergissMeinNicht” (www.vergissmeinnicht.bz.it), a social cooperative in Bruneck giving young cross-border workers and people with disabilities a place in the world of work, will be partnering Durst for processing and assembling the masks. Under the motto appreciation and added value, the specialized sewing service finalizes the “community masks” in a protected environment. It also focuses on sustainability for packaging.

The community masks can be obtained from end customers in South Tyrol via the company Kunst & Dünger Solutions (maskenmacherei.online) - personalized and up to a print run of 300 pieces. For larger quantities or inquiries about pixel-to-output software and hardware solutions for production, please contact: protection@durst-group.com.

Further information on the Durst "community masks" initiative from:

https://www.durst-group.com/masks

Durst Como is born

The Durst Group, a leading manufacturer of digital printing and production technologies, is setting another milestone in the digital textile industry: the merger with Aleph SrL is entering its final phase. With legal completion expected by the end of 2025, Aleph will be fully integrated into the Durst Group, and Durst Como will emerge as a new center of excellence for digital textile printing.

USColorworks expands digital platform with Kornit Atlas MATRIX and Atlas MAX PLUS solutions

Kornit Digital Ltd. (NASDAQ: KRNT), a global pioneer in sustainable, on-demand digital fashion and textile production, today announced that USColorworks, a North Carolina-based apparel decoration and fulfillment company specializing in custom and on-demand printing for retail and promotional markets, has expanded its Kornit digital production platform with the addition of Atlas MATRIX and Atlas MAX PLUS systems to deliver high-quality, on-demand apparel across cotton, blended fabrics and polyester.

DTF vs DTG Printing - The technologies shaping today’s custom merchandise market

From sportswear to branded tote bags, custom merchandise continues to grow in popularity across sectors, driving print shops to cater to short runs, personalisation, and rapid turnaround. As print providers look to this market, two printing technologies often stand out: Direct‑to‑Film (DTF) and Direct‑to‑Garment (DTG). Each offers its own benefits, and understanding these differences helps determine the most suitable production method for print service providers.

Mimaki celebrates Triple EDP Award win at FESPA 2026

Mimaki Europe, a leading manufacturer of industrial inkjet printers and cutting plotters, was presented with 3 EDP Awards at the association’s 2026 ceremony, held at FESPA Global Print Expo. These highly acclaimed awards celebrate best-in-class innovation across the print industry, and Mimaki was honoured in three different categories.

EFI brings high-performance display graphics, packaging, and textile printing innovations to FESPA 2026

Electronics For Imaging, Inc. (EFI™) is bringing a broad range of new hybrid, roll-to-roll, and textile inkjet innovations to FESPA Global Print Expo 2026, taking place 19-22 May at Fira Barcelona Gran Via. Visitors to the EFI stand (Hall 3, #C85) will see the new EFI VUTEk M3h X hybrid LED printer, new EFI VUTEk® FabriVU® 340 i8 eight-colour dye sublimation printer, the EFI VUTEk X5r roll-to-roll LED printer, and the EFI VUTEk Q3h XP seven-colour hybrid printer in action, each designed to help sign and display producers scale output, diversify applications, and drive more profitable growth.

ALADIN paves the way for circular and demand-driven textile production in Europe

Textile production can be organized sustainably by utilizing short supply chains and preventing overproduction. This can already be achieved today by intelligently connecting and efficiently utilizing existing infrastructure. At the same time, production becomes circular when innovative technologies and materials are used that enable high-quality recycling. The ALADIN research project, launched in May 2026 and co-funded with five million euros under the EU Horizon Europe program, is creating the conditions for this.

Katharina Obergruber appointed to the Management Board of Sandler AG

The Supervisory Board of Sandler AG has appointed Katharina Obergruber to the company’s Management Board. Effective September 1, 2026, the Board will consist of Philipp Ebbinghaus (CEO), Dr. Ulrich Hornfeck (currently CCO, future COO), and Katharina Obergruber (CCO). Katharina Obergruber, currently Chief Sales Officer Hygiene and member of the Management Team of Sandler AG, will assume responsibility for all sales activities as Chief Commercial Officer. She will assume this role from Dr. Ulrich Hornfeck, who will focus primarily on production and supply chain topics.

Ence and ShareTex begin initial testing of the ATENEA innovation project to promote textile recycling in Spain

Ence and ShareTex are making progress on the Atenea R&D project, which aims to develop a complete value chain for textile recycling in Spain. Specifically, the goal of the ATENEA project—which is funded by the Center for Technological Development and Innovation (CDTI)—is to connect all the necessary stages for the recovery of textile waste, from collection and management, through recycling and transformation into new raw materials, to their incorporation into new textile products.

DePoly Inaugurates its Showcase Plant in Monthey Switzerland

What if used plastic bottles, PET packaging material and polyester textiles could become raw materials just as high performing as virgin resources? That is the ambition of DePoly, a circular materials company based in Sion, Switzerland which inaugurated its Showcase Plant in Monthey on July 6th & 7th. The first depolymerization facility of its kind and scale in Switzerland, this industrial Showcase Plant represents a major milestone in the company's growth and its journey toward commercialization.