#Composites

2019-08-08

Teijin completes acquisition of Renegade

Teijin Limited announced today that it has completed the acquisition of all the shares of Renegade Materials Corporation (Renegade), a leading North American supplier of highly heat-resistant thermoset prepreg for the aerospace industry. The acquisition was completed on August 1, Eastern Standard Time.

The acquisition of Renegade will allow Teijin to expand its aerospace business, including next-generation aircrafts' engine parts. Teijin will benefit from Renegade's well-established proprietary technologies and capabilities in thermoset prepregs that incorporate highly heat-resistant resins. Renegade develops and manufactures unique thermal-cycle resistant prepregs made from low-toxicity raw materials.

Teijin is strengthening its carbon fiber and intermediate materials businesses to solidify its position as a leading provider of solutions for aerospace applications. Teijin is targeting annual sales in this field in excess of USD 900 million by around 2030.

"We have been increasingly focusing on our carbon fiber business on the aircraft field as a top supplier to world-leading aircraft makers," says Shukei Inui, General Manager of Teijin's Carbon Fibers Business Unit. "Renegade's well-trusted technologies as well as its sales channels in this field, together with our global sales network, will reach wider markets to strong, lightweight, high-performance materials that offer environmentally sensitive solutions for improved fuel efficiency."

"We are excited to become part of Teijin's global family located in the U.S.," says Eric Collins, Chief Executive & Financial Officer of Renegade Materials. "Teijin is committed to supporting our advanced materials and proprietary production processes, allowing us to reach wider markets through its sales network and marketing initiatives. Significant resources are now available to expand product development and manufacturing capabilities, powered by Teijin's vast expertise in carbon fibers and chemistry."

Teijin announces availability of DPP-compliant products aligned with Europe’s ESPR Environmental Regulation

Teijin Limited announced today that it has started rolling out initiatives to enable aramid fibers and carbon fibers to be accompanied by Digital Product Passport (DPP) technology, which enhances supply chain transparency by verifying the origins of materials and supporting sustainability claims. The company is using the supply chain traceability system from Netherlands-based Circularise B.V., in which Teijin has invested since November 2024, to develop DPPs for each product.

Teijin Carbon showcases new eco-friendly Tenax Next™ R2S 513 6mm short carbon fiber at JEC World 2025

Teijin Carbon, a leading manufacturer of carbon fiber products, is presenting its latest development in sustainable materials at JEC World 2025 (hall 6, G22). New Tenax Next™ R2S 513 6mm is a short carbon fiber product in rice-shaped form for reinforcing thermoplastic compounds that not only offers exceptional performance characteristics but also reinforces the company’s commitment to environmental responsibility and circularity.

Teijin to invest in Circularise B.V. and adopt its supply chain traceability platform to promote the Circular Economy

Teijin Limited announced today that it will invest in Circularise B.V., a company based in The Hague, Netherlands, which develops product traceability management systems using blockchain technology. Teijin will also implement Circularise’s software to improve visibility into its global supply chain. Circularise’s proprietary “Smart Questioning”(*) solution, which utilizes Zero-Knowledge Proof (ZKP) technology, provides both anonymity and transparency to ensure a highly reliable product traceability system.

Novel flame-retardant and recyclable fiber-reinforced composite

Airplanes and passenger trains must meet strict safety requirements, including fire safety standards. This calls for materials that are flame-retardant, lightweight, robust, and scalable. Empa researchers, in collaboration with their industry partner Elantas, have now succeeded for the first time in making such a material – a composite – fully recyclable.

WHILL selects Teijin’s tough, lightweight Carbon Fiber Composite for new last-mile mobility

Teijin Limited announced today that WHILL Inc., a global leader in inclusive mobility technology, has selected Sereebo® P CFP series, a carbon fiber-reinforced thermoplastic (CFRTP) material, for key structural components of the upcoming WHILL Model C Lite. Sereebo® P CFP series provides high strength, light weight, design flexibility and system cost advantages to the Model C Lite, which is a battery powered, single-seat, last-mile device. This new model combines maneuverability with light weight and one-handed folding to ensure ease of handling and operation.

Fewer pores, greater impact tolerance: Peter Dornier Foundation Prize 2026 honours material research on fibre-reinforced composite components for aerospace industry

Microscopically small pores that form during manufacture, or barely visible impact damage, can severely impair the load-bearing capacity and service life of fibre-reinforced composite components. Two young researchers have presented groundbreaking work in this field and will both be awarded the 2026 Peter Dornier Foundation Prize: Dr.-Ing. Benedikt Neitzel from the Technical University of Ilmenau for his doctoral thesis on pore minimisation in the RTM process, and Johanna Buschmann, M.Sc., for her master’s thesis, completed at the German Aerospace Centre, on the improved impact tolerance of 3D fabrics compared to 2D laminates.

Mayer & Cie. Global gears up tor ITMA Asia 2026

Mayer & Cie. Global will focus on mattress fabric production at ITMA Asia, taking place in Shanghai from 20 to 24 November 2026. The company will showcase one of its flagship models for this application: the OVJA 2.4 EM. Joining the mattress fabric specialist will be an OV 3.2 QCe, presented at ITMA Asia in a configuration for knitting double-face fabrics in E40. This gives the OV 3.2 QCe a combination of capabilities rarely found in the market. The German textile machinery manufacturer will also introduce its new portfolio strategy and share updates from its development team at its Albstadt headquarters.

FET highlights advances in fibre spinning technology at Dornbirn Global Fiber Congress

Fibre Extrusion Technology Limited (FET) presented its latest developments in fibre spinning technology at the Dornbirn Global Fiber Congress in Austria in September 2026. In a presentation entitled “Spinning a good yarn”, Dr Jonny Hunter examined recent technological developments and challenges facing the fibre industry, highlighting the company's expanding range of specialised fibre extrusion and spinning systems.

Vietnam’s market evolution creates new sourcing opportunities at VIATT 2027

As Vietnam’s textile industry continues to upgrade and scale, new opportunities are emerging for suppliers of advanced raw materials, design-led fabrics, production technologies, and sustainability solutions. The Vietnam International Trade Fair for Apparel, Textiles and Textile Technologies (VIATT) will return 24 – 26 February 2027, presenting a cross-sector platform – spanning apparel, home and technical categories – for overseas companies to connect with manufacturers, brands, sourcing offices, retailers, and industry buyers from Vietnam, ASEAN, and beyond.