#ITMA 2019

2019-06-25

ITMA 2019 - Saurer celebrates the 30th anniversary of CableCorder

(c) 2019 Saurer - 30th anniversary of CableCorder celebrated at ITMA Barcelona showing CableCorder CC5

Saurer can celebrate the 30th anniversary of its CableCorder with impressive figures. With more than 1 900 CableCorders sold, around 270 000 spindles have been put into operation in the last 30 years. The CableCorder for production of high-quality tire cord is a permanent fixture in the tire industry.

The CableCorder CC5 is a winning further development

The fifth generation of the CableCorder will appeal to customers with numerous innovations. It provides Saurer's customers with decisive competitive advantages: they benefit from higher efficiency, lower energy consumption, a smart spindle concept, modern quality monitoring, improved ergonomics, flexible automation solutions and the integration of the CableCorder into Senses, the Saurer mill management system.

Energy, productivity, quality

Saurer has further improved the patented energy-saving technology of the latest machine generation with new hardware and optimised software. The CableCorder CC5 is therefore more economical than ever.

The optimised thread balloon diameter and reduced spindle gauge cut down space requirements and increase productivity. Online monitoring of the quality parameters reliably ensures the required quality of the tire cord. User-friendly and intelligently automated new machine components and an optimum thread path enable extremely straightforward operation and process reliability. Intelligent automation solutions increase the efficiency of package transport.

In addition to the basic CC5 version, the new CableCorder is also available in the CC5-TFO version for production of yarns in the two-for-one twisting process and as the CC5-3PLY version for production of symmetrical 3-ply tire cord.

Key features of the CableCorder CC5

Reduced spindle gauge due to optimised thread balloon diameter
Further energy savings as a consequence of the adapted spindle pot geometry
Sensor-based control system for compliance with quality parameters
Integration into Senses, the mill management system, for monitoring and evaluating production data
Servo-assisted creel, new thread guide elements and new Cord Regulator for greater user-friendliness
CC5-TFO variant for production of yarns in the two-for-one twisting process and CC5-3PLY variant for production of symmetrical triple tire cord.

Saurer Technologies Twisting Solutions at ICFE 2026

Saurer Technologies Twisting Solutions, a global leader in textile machinery innovation, will be present at the International Carpet and Flooring Expo ICFE 2026. Join us January 6–9 at the Istanbul Expo Center, Türkiye, as industry leaders, manufacturers, and innovators gather to explore the latest breakthroughs in carpet and flooring technology. Let’s meet at the new established global Center of the Carpet Sector in hall 3, booth 300!

Saurer’s leading technology for the yarns of tomorrow at ITMA Asia 2025

Saurer, is looking forward to presenting the latest innovation highlights at the ITMA Asia + CITME 2025 in Singapore on booth C 301 in hall 3. The spinning, twisting, and automation solutions are underlining the commitment to driving efficiency, sustain-ability, and digitalisation in the textile industry, paving the way for the yarns of tomorrow.

Gebr. Otto highlights versatility at Techtextil with regional supply chains, yarn innovations and new hygiene segment

At this year’s Techtextil, Gebr. Otto places its versatility at the center of its presentation. In addition to spinning, twisting and dyeing – traditionally focused on fine cotton – textile processors will also find a competent development partner for technical specialty solutions. The Dietenheim-based spinning mill has now built up a decade of experience in the production of technical yarns, particularly from aramids. A new hygiene segment has also been established, where yarns for medical and hygiene products are currently being produced. In the future, this department could also develop textile products for the food sector. Gebr. Otto will once again be present at the BW-i joint stand, booth D81, hall 12.1. What is wound onto the spool is determined by the customer: Gebr. Otto develops according to specific customer requirements and transforms its own ideas into yarn innovations.

Commission presents proposal for EU Inc. - unlocking the full potential of the Single Market for Europe's entrepreneurs

Today, the European Commission presented its proposal for EU Inc., a new single set of corporate rules, building the cornerstone and starting point for the EU's 28th regime. EU Inc. is an optional, digital-by-default European corporate framework. It will make it easier for businesses to start, operate and grow across the EU – incentivising them to stay in Europe, and encourage those who once looked elsewhere to return.

OnceMore® from Södra brings end-to-end traceability for circular Man-made Cellulosic Fibers (MMCF) using TextileGenesis

OnceMore® from Södra, the world’s first large-scale process for recycling blended fabrics into high‐quality dissolving pulp, will begin using TextileGenesis, a Lectra company, to strengthen traceability from raw material to retail across the value chain. OnceMore® produces dissolving pulp made from blended textile waste and wood sourced from responsibly managed Swedish forests. By integrating TextileGenesis, OnceMore® supports the growing need for verified data and secure, transparent tracking throughout increasingly complex supply chain.

Experts publish APAC policy priorities

Cascale today announced the publication of its APAC Policy Priorities Paper, developed by the Asia-Pacific (APAC) Policy Member Expert Team (MET) to identify key regional sustainability challenges and provide practical, aligned recommendations for policymakers and industry stakeholders across Asia-Pacific.