[pageLogInLogOut]

#Other suppliers

Next date for Texcare International in November 2024

© 2021 Messe Frankfurt
From 9 to 13 November 2024, manufacturers of laundry and dry-cleaning technology will once again meet in person with textile-care companies at the Frankfurt Exhibition Centre for Texcare International. Messe Frankfurt and its partners have agreed on this date.

Every four years, textile-service companies, laundries and dry cleaners from all over the world come to Frankfurt for Texcare International. The focus is on innovations in the industry and on networking and exchanges with business partners. Due to the Corona pandemic, the trade fair had to be suspended once in 2020/2021. Messe Frankfurt and its partners, VDMA Textile Care, Fabric and Leather Technologies and the German Textile Cleaning Association, have now jointly agreed a new date for the next Texcare International: From 9 to 13 November 2024, the international industry highlight will celebrate its physical comeback in Frankfurt.

Johannes Schmid-Wiedersheim, Director Texcare International, explains: "There were two decisive reasons for choosing the new date. On the one hand, it fits very well into the international trade fair calendar. On the other hand, it was favoured by exhibitors and visitors because it is during the low season for the tourism industry, when most investments are made. We are already looking forward to the next Texcare International, to real business encounters and live presentations in 2024 and are working with full energy towards the success of the event."

Technology suppliers use Texcare International to launch their innovations, which they often develop just in time for the fair. The frequency of the fair therefore also goes hand in hand with the innovation cycle of the manufacturers. The appeal of Texcare International for visitors and exhibitors alike lies in the bundling of innovations in one place, 'real' machines and intensive exchange with business partners. The product range extends from laundry and dry-cleaning technology, detergents and cleaning agents, linen and workwear to IT and logistics.



Until the next Texcare International, Messe Frankfurt is offering the industry further events for textile care in important economic regions of the world. Following the successful start in Nantes, the second Texcare Forum France will be held in Marseille on 13 December.  In the United States, preparations are already in full swing for the Clean Show from 30 July to 2 August 2022. The next Texcare Asia & China Laundry Expo from 11 to 13 August 2022 will be the industry meeting place for the dynamic Asian markets. Texcare Forum Russia is also scheduled for autumn 2022. For further information on Messe Frankfurt's textile-care fairs and forums, please visit:

http://www.texcare.com/brand

http://www.textile-care.messefrankfurt.com/newsroom.



More News from Messe Frankfurt (HK) Ltd.

#Techtextil 2026

From concept to stage: Submit presentations for the Techtextil Forum and Texprocess Forum 2026 now

Anyone who wants to contribute to shaping the future of the textile industry can submit a presentation for the Techtextil and Texprocess Forum by 15 December 2025. Both stages represent innovation and practical solutions and promote exchange between research and industry. An international Programme Committee selects the contributions and curates a programme on key future topics in the textile sector. From 21 to 24 April 2026, the two leading trade fairs will once again be the centre of global business dialogue in Frankfurt.

#Yarns

Yarn Expo Spring 2026 spotlights industry transformation

Taking place 11 – 13 March 2026 at the National Exhibition and Convention Center in Shanghai, Yarn Expo Spring 2026 is set to build on the exceptional success of the 2025 edition, which attracted nearly 24,000 visitors from 123 countries and regions. The show set a record with over 560 exhibitors showcasing their latest innovations. Notably, regenerated fibres and yarns drew the highest interest among visitors, with 57% sourcing in that category. Reflecting growing industry momentum, Yarn Expo Spring 2026 will continue to serve as a key global platform for driving sustainable development within the yarn and fibre sectors.

#CINTE Techtextil China 2025

Cinte Techtextil China 2025 opens this week with new products, innovation-focused exhibitors and fringe events

International and domestic exhibitors are relishing the chance to present their curated products at Cinte Techtextil China, when the fair opens from 3 to 5 September 2025, spanning three halls and 32,000 sqm at the Shanghai New International Expo Centre.

#Texprocess 2026

Texprocess 2026 with strong registration figures – industry positions itself on key future issues

Over 200 exhibitors, including numerous new exhibitors, top brands and long-standing customers, have already registered for Texprocess 2026. The most important global industry meeting place focuses on automation, digitalisation and AI from 21 to 24 April 2026. Technological innovations provide concrete answers to the current demands of industry, such as efficiency and flexibility. Exhibitors also benefit from visitors to the concurrently held Techtextil.

More News on Other suppliers

#ITMA Asia + CITME Singapore 2025

Asteks to meet the global market at ITMA ASIA + CITME Singapore 2025

Getting ready to take its place at ITMA ASIA + CITME Singapore 2025 with advanced grinding solutions and a wide range of aprons and cots, Asteks is expanding its target for the Asian market. The company, focusing on strengthening relations with current and potential customers, will highlight the “Made in Türkiye” label with its innovative and competitive products.

#Dyeing, Drying, Finishing

WickView Moisture Management Tester recognized by new AATCC industry standard

James Heal’s WickView Moisture Management Tester now has an official industry standard, with the new test method just released by The American Association of Textile Chemists and Colorists (AATCC), TM217-2025 – Liquid Moisture Management Vertical and Horizontal Wicking - Image Analysis.

#Other suppliers

New impulses for the textile care industry: Texcare 2024 supporting programme

The focus of Texcare International 2024 (6-9 November) will be on the major challenges facing the textile care industry, including automation, energy saving, circular models and textile hygiene. Together with its partners, the leading trade fair has designed a supporting programme that can offer progressive impulses for the future of the sector.

#Other suppliers

Microfactory for filter bags developed in Sweden

After an intensive few years of development, ACG Kinna Automatic and ACG Nyström – members of TMAS, the Swedish textile machinery association –have delivered the first microfactory for the production of fully finished filter bags to a major international filtration industry customer, in cooperation with JUKI Central Europe.

Latest News

#ITMA Asia + CITME Singapore 2025

Innovation and customer proximity – KARL MAYER’s clear focus makes an impression

ITMA ASIA in Singapore was a resounding success for KARL MAYER, exceeding all expectations. The company welcomed visitors from 39 countries and held around 570 expert discussions. Most guests came from India, followed by China, Indonesia and Pakistan. The exchange with them was both well-founded and targeted. Conversation topics ranged from investment projects and new technologies to opportunities for cooperation and business expansion.

#Recycling / Circular Economy

Nanollose creates the world’s first wearable fashion garment made from liquid waste

Australian-based biomaterial technology company Nanollose Ltd (ASX: NC6) has created the world’s first wearable garment using the company’s eco-friendly Tree-Free Rayon fibre (NullarborTM), sourced from sustainable coconut waste.

#Research & Development

Catching heart disease early with AI-based sensor system

It slips on like a normal vest: Fraunhofer IZM has created a smart sensor system in cooperation with the Charité and the Technical University of Berlin. The vest records a vast array of cardiovascular parameters, which an AI-based system uses to support medical diagnostics and spot potentially dangerous developments.

#ITMA Asia + CITME Singapore 2025

Singapore edition of ITMA ASIA + CITME makes successful presentation

The region’s leading textile and garment technology exhibition, ITMA ASIA made a successful return to Singapore after two presentations in 2001 and 2005.

TOP