#ITMA 2023

2023-05-25

Way2ITMA: Recycling technologies offered by VDMA members

In the run-up to ITMA, VDMA is presenting an overview of the textile recycling technologies offered by member companies exhibiting at ITMA. VDMA and its members are committed to a responsible use of all resources used in textile production. VDMA members create the technical prerequisites for the efficient reuse and recycling of textile raw materials.

In the spirit of the circular economy, VDMA companies offer solutions for the entire processing and production chain. The production programme and services include equipment and technologies for recycling textile production waste, textiles, textile auxiliaries or waste heat and for processing recycled materials into textiles.

An overview of the available technologies is provided here: Way2ITMA-Recycling (http://vdma.org/itma). The short descriptions of the solutions offered by the member companies are structured according to the following headings:

• Recycling of textile production waste and textiles

• Recycling of caustic soda and waste heat

• Processing of recycled materials

All VDMA members are looking forward to welcoming visitors from all around the world to their booths at ITMA in Milan. A pocket guide, listing all exhibiting VDMA member companies, will be available at the fairgrounds.

VDMA Textile Machinery with new Executive Board

At the general meeting of VDMA Textile Machinery held in Hanover at the end of September, Dr Janpeter Horn, Managing Director of A. Herzog Maschinenfabrik, was re-elected as Chairman of the trade association. Regina Brückner, managing partner of Brückner Trockentechnik, and Verena Thies, managing partner of Thies Textilmaschinen, will once again serve as vice-chairs for the next four years.

Young talents honoured – 60 years Walter Reiners Foundation

At the Techtextil trade fair in Frankfurt at the end of April, Peter D. Dornier, chairman of the VDMA’s Walter Reiners Foundation, presented awards to five successful young engineers. Promotion and sustainability awards were presented in the categories of bachelor’s/project theses and diploma/master’s theses. Academic theses are eligible for the sustainability awards if, for example, they develop solutions for resource-efficient products and technologies.

Young researchers recognised for cutting-edge work in recycling, fibre technology and textile mechanics

At the Aachen-Dresden-Denkendorf International Textile Conference held in Aachen at the end of November, Peter D. Dornier, Chairman of the Walter Reiners Foundation of the VDMA, honoured five successful young engineers. Promotion and sustainability prizes were awarded in the categories bachelor/project theses and diploma/master theses. Academic theses that develop solutions for resource-saving products and technologies, for example, are eligible for the sustainability awards.

VDMA members at ITMA ASIA + CITME in Singapore

With 69 exhibiting member companies, ITMA ASIA + CITME 2025 is once again marked by a strong presence of VDMA companies. Altogether 82 companies from Germany will exhibit at the show, covering about 3,500 square meters of exhibition space, topped only by China and Italy. VDMA initiated a German Pavilion with two group stands (spinning in hall 4 and finishing in hall 7) with a total of 30 exhibitors.

DITF develops bio-based binding fibers for wood-fiber insulation materials

As part of the CelluWoodFlex project, the German Institutes of Textile- and Fiber-Research in Denkendorf (DITF) are developing bio-based cellulose ester fibers as alternative binding fibers for flexible wood fiber insulation materials. In addition to the spinning process and the production of suitable staple fibers, the institute is also investigating how wood and cellulose fibers can be separated and recycled at the end of their useful life.

Magnera highlights HighPleat™ filtration media technology at FiltXPO 2026

At FiltXPO 2026, held on October 28–29 at the Minneapolis Convention Center in Minneapolis, Minnesota, Magnera highlighted advances in air filtration media architecture, with a particular focus on its HighPleat™ platform for MERV 8–10 applications. The technology combines a lofted fiber structure with optimized pore architecture to address the challenge of balancing filtration efficiency, airflow resistance and contaminant-holding capacity.

Ahlstrom expands depth filtration media production capacity at US facility

Ahlstrom has completed a major investment in its Kingston manufacturing facility in New York, USA, expanding production capacity for high-performance depth filtration media. The modernization of Line 3 is designed to improve manufacturing efficiency, enhance quality control and increase flexibility in producing different product widths.

Autoneum to acquire Trèves Group, creating automotive supplier with over CHF 2.9 billion in revenue

Swiss automotive supplier Autoneum has announced an agreement to acquire the French Trèves Group, a specialist in automotive acoustic and thermal insulation, interior trim and trunk solutions. The transaction is expected to create a combined organisation with pro-forma revenue exceeding CHF 2.9 billion in 2026, strengthening Autoneum's position in the global automotive supply industry.