[pageLogInLogOut]

#Dyeing, Drying, Finishing

Monforts focus on energy savings at IGATEX 2025

At the forthcoming IGATEX textile machinery exhibition in Karachi, Pakistan, from April 24-26, Monforts will highlight the benefits of its latest Universal Energy Tower. This stand-alone air/air heat exchanger module enables recovery of the heat from the exhaust air flow of thermal systems such as existing stenters and THERMEX dyeing ranges with infrared predriers, resulting in energy savings of up to 25%, depending on the exhaust air volume and operating temperature.
The stand-alone Universal Energy Tower enables the heat from the exhaust air flow of thermal systems to be recovered © 2025 Monforts
The stand-alone Universal Energy Tower enables the heat from the exhaust air flow of thermal systems to be recovered © 2025 Monforts


The Energy Tower has an integrated fresh air fan with speed control. It offers good access to the heat exchanger modules for easy cleaning as well as a large condensate collection tank with a lint filter. Visualisation of real-time temperature and maintenance intervals is also included.

The Universal Energy Tower is one of a series of modular upgrades the company has developed to be added to existing finishing lines already in production, with a significant impact on a manufacturer’s operational costs.

“Monforts machines are known for their robustness and long service life, but the retrofitting of specific modules with new control and drive technology – going far beyond the basic replacement of spare parts – can have a significant impact on the performance of an existing line,” says Monforts Area Sales Manager Manfred Havenith. “This is especially the case in achieving further energy savings. At this year’s IGATEX, we are looking forward to discussing the possibilities with customers. Compared to a new machine, upgrades are a low-cost investment that deliver clearly defined benefits.”

The Matex Eco Applicator is meanwhile an alternative to the conventional padding process for energy-conscious finishing and achieving considerable savings in the energy required for drying treated fabrics. The precise amount of finishing chemical can be applied to the fabric and with less residual moisture after application of only approximately 35%, so that less drying capacity is required in the stenter, which leads to huge energy savings.

Finishing chemicals can be evenly applied on either or both sides of the fabric, and two separate treatments can be applied to front and back. 

This makes the unit ideal for the production of, for example, double-performance hydrophobic/hydrophilic fabrics for professional clothing, as well as the over dyeing or finishing of denim fabrics.

Options

“Other general retrofitting options available in our modular upgrade programme include a clip opener for the MONTEX stenter, which is located at the chain deflection points and reduces wear on the clip table and the blades,” says Manfred Havenith. “At the same time, it ensures a quieter working atmosphere due to the smooth opening and closing of the clips. 

Monforts Area Sales Manager Manfred Havenith © 2025 Monforts
Monforts Area Sales Manager Manfred Havenith © 2025 Monforts


“There are also considerable benefits to be gained from bringing a machine’s HMI up to date with our new 19-inch compact OS Windows PCs, as well as with a range of frequency converter options for bringing a machine completely up to date technically and reducing downtimes. With more than 140 years of experience, Monforts is the right partner to assist retrofits to help with sustainability and energy savings.”

Monforts continues to gain significant repeat orders for its equipment from Pakistan’s major vertically-integrated textile manufacturers as they seek to both expand and diversify into new markets.Customers in the regions around Pakistan’s three biggest cities of Karachi, Lahore and Faisalabad include all of the main players in the fields of home textiles and denim production.

“These companies rely on our established technologies, including MONTEX stentering equipment, Monfortex sanforizing units and THERMEX dyeing ranges,” says Manfred Havenith. “As they look to new markets in today’s highly-competitive industry, we continue to assist them with trials and optimised processing parameters in developing advanced fabrics for a wide range of end-uses, both at their own plants and at our Advanced Technology Centre (ATC) in Germany.”

Monforts specialists can be consulted at the stand of partner Al-Ameen at IGATEX 2025, A13-A30 in Hall 5.




More News from A. Monforts Textilmaschinen GmbH & Co. KG

#Dyeing, Drying, Finishing

AEI reaps the benefits of all-electric new Monforts range

The impact of the rising cost of energy on the textile industry has been well documented, with some European countries paying up to seven times more to run their manufacturing operations than in other regions of the world.

#India ITME 2026

Monforts ready for India’s next phase of textile growth at ITME 2026

Advanced finishing, coating and energy-efficient processing will be highlighted by Monforts at India ITME 2026, as the region’s textile manufacturers increasingly look beyond volume production towards higher-value fabrics. The German finishing machinery specialist sees considerable potential in India as investment continues in conventional apparel and home textiles alongside rapidly developing markets for technical textiles, activewear, sportswear, filtration and automotive applications.

#IGATEX 2026

Impressive savings with Monforts’ stand-alone air/air heat exchanger

Having maintained an 80% share of Pakistan’s new stenter market with MONTEX machines for over 20 years and additionally now installed over 40 THERMEX dyeing ranges in the country, Monforts will highlight the benefits of its latest Universal Energy Tower at IGATEX 2026.

#Dyeing, Drying, Finishing

Turning new ideas into industrial reality at the Monforts ATC

The Monforts Advanced Technology Centre (ATC), initially opened in 2103 and subsequently expanded, continues to be an invaluable resource to customers from around the world in achieving new standards in fabric finishing.

More News on Dyeing, Drying, Finishing

Latest News

#ITMA Asia + CITME 2026

ITMA ASIA + CITME 2026 opens in Shanghai, showcasing intelligent and sustainable textile manufacturing

ITMA ASIA + CITME 2026 opened today at the National Exhibition and Convention Center in Shanghai, bringing the global textile machinery industry together from 20 to 24 November.

#Associations

Christoph René Holler to succeed Uwe Mazura as managing director of textil+mode

Christoph René Holler will take over as managing director of textil+mode, the German textile and fashion industry confederation, on 1 January 2027. He succeeds Uwe Mazura, who has led the association for 13 years and will remain in charge of collective bargaining policy through the next round of negotiations before retiring.

#Heimtextil 2027

Heimtextil and The Florentin showcase the role of textiles in hotel design

Heimtextil has partnered with Frankfurt hotel The Florentin by Althoff Collection for its new Interior.Architecture.Hospitality campaign. The collaboration will give architects, interior designers and other contract-sector professionals a closer look at how textiles were used in the hotel. The two studios behind the project will discuss their work at Heimtextil on 14 January 2027 in Hall 4.1.

#EU Textile Strategy

EU Commission proposes advanced materials agenda with targets for 2035

The European Commission has proposed an Advanced Materials for Europe agenda to accelerate the development, production and adoption of safer and more sustainable advanced materials. The proposal sets three benchmarks for 2035 and calls for closer coordination among EU member states to help move new materials from the laboratory into industrial production.

TOP