[pageLogInLogOut]

#JEC WORLD 2022

Teijin’s composite highlights at JEC World 2022

The Teijin Group announced today that it will showcase a wide variety of high-performance composite products at JEC World 2022. True to the motto “Sustainable Solutions for your Ideas”, Teijin`s high-performance materials and composites meet all requirements of the manufacturing industry by contributing to product cycle time and performance properties, while reducing environmental impact and improving end-user`s comfort and safety.

The annual exhibition will take place from May 3 to 5 in Paris as well as online via the JEC World Connect digital platform.

Concentrating on aerospace and automotive applications, stated as the group’s Strategic Focus in its Medium-term Management Plan for 2020–2022, the following exhibits can be experienced at the Teijin booth (hall 6, booth G28):

- Trailing edge panel for aircraft produced by Spirit Aerosystems using TenaxTM rapid curing aerospace prepreg and press molded in only a 20 minutes curing cycle.

- Aircraft wing rear spar produced by Airbus Spain-FIDAMC using TenaxTM Dry Reinforcement Non-Crimp Fabrics in resin transfer molding, ensuring repeatable quality and compatibility with high production rates.

- Voith Carbon4Tank containing TenaxTM ThermoSet Towpreg. Teijin Carbon Europe manufactures epoxy resin based Towpregs for automotive and industrial applications based on its TenaxTM ITS50 24K fiber.

- Armored aircaft seat containing TwaronTM Aramid Fiber for ballistic armor, able to protect up to 95% of the occupant with full body armor.

- Twaron® based air freight containers that are durable, strong, lightweight and fire resistant while offering fuel savings and increased safety.

- Lightweight Multi-Material Door, a finalist for the JEC Innovation Award in the Automotive and Road Transportation Category, features a specially modified, low VOC TCA Ultra Lite® outer panel, a hybrid glass and carbon fiber SMC inner panel, and an innovative steel internal reinforcement ring. It is 2.7 kg lighter than a traditional door made from steel.

- Multi-material EV Battery Enclosure, which features a one-piece composite cover and one-piece composite tray with aluminum and steel reinforcements. By molding the cover and the tray each as one piece, Teijin Automotive Technologies has created a system which is easier to seal and can be certified prior to shipment.



Also, JEC World Mobility Innovation Planet will highlight Envision Racing`s Formula E car, representing the collaboration between the team and the Teijin Group. Through this relationship, Teijin enhances the development of sustainable technologies while continuing to build global consciousness on climate change.

Furthermore, Teijin representatives will make presentations regarding composites that contribute to sustainable society.


JEC World is the leading international composites show organized by the JEC Group, the world’s largest composites industry organization.




More News from Teijin Aramid

#Yarn & Fiber

Teijin Aramid: Taiichi Machida to succeed Peter ter Horst as CEO

Peter ter Horst will step down as Chief Executive Officer at the end of 2025, after 19 years of dedicated service. Effective October 1, 2025, Taiichi Machida will take over as CEO.

#Yarn & Fiber

Teijin announces availability of DPP-compliant products aligned with Europe’s ESPR Environmental Regulation

Teijin Limited announced today that it has started rolling out initiatives to enable aramid fibers and carbon fibers to be accompanied by Digital Product Passport (DPP) technology, which enhances supply chain transparency by verifying the origins of materials and supporting sustainability claims. The company is using the supply chain traceability system from Netherlands-based Circularise B.V., in which Teijin has invested since November 2024, to develop DPPs for each product.

#Composites

Teijin Carbon showcases new eco-friendly Tenax Next™ R2S 513 6mm short carbon fiber at JEC World 2025

Teijin Carbon, a leading manufacturer of carbon fiber products, is presenting its latest development in sustainable materials at JEC World 2025 (hall 6, G22). New Tenax Next™ R2S 513 6mm is a short carbon fiber product in rice-shaped form for reinforcing thermoplastic compounds that not only offers exceptional performance characteristics but also reinforces the company’s commitment to environmental responsibility and circularity.

#Recycling / Circular Economy

Teijin to invest in Circularise B.V. and adopt its supply chain traceability platform to promote the Circular Economy

Teijin Limited announced today that it will invest in Circularise B.V., a company based in The Hague, Netherlands, which develops product traceability management systems using blockchain technology. Teijin will also implement Circularise’s software to improve visibility into its global supply chain. Circularise’s proprietary “Smart Questioning”(*) solution, which utilizes Zero-Knowledge Proof (ZKP) technology, provides both anonymity and transparency to ensure a highly reliable product traceability system.

More News on JEC WORLD 2022

Latest News

#Recycled Fibers

Indorama Ventures enables brands to scale circular textiles through proven, traceable supply chains

Indorama Ventures, a global leader in recycled polyester staple fibers and filament yarns, will exhibit at Textiles Recycling Expo in Brussels on June 24–25. At the event, the company will show how brands and textile manufacturers can build traceable, circular textile supply chains by working with proven partners who deliver recycled materials on an industrial scale.

#Recycled Fibers

RECOVER™ launches Recover™ Yarns to accelerate recycled cotton uptake

Recover™, a leading materials science company and one of the world’s largest producers of recycled cotton fiber, today announces the launch of Recover™ Yarns, a curated portfolio of ready-to-use yarn solutions designed to accelerate the adoption of recycled cotton across the apparel supply chain.

#Spinning

Barmag and Hitech Automation enter into partnership for an auto-doff system for texturing machines

Barmag (Suzhou) Technology Co., Ltd. and Hitech Automation Solutions PVT LTD. of Surat, India, have agreed to an exclusive partnership to jointly market Hitech’s Doffmatic automation solution for Barmag’s proven manual eFK texturing machines. In many texturing facilities, manual doffing processes remain heavily operator-dependent – resulting in issues such as increased scrap, inconsistent quality, and limited productivity.

#ITM 2026

Uster’s new Recycling Opening Index guides spinners to the perfect blend

Uster AFIS 6 now offers the key data for better decisions when blending recycled fibers. Process control is decisive in determining the quality and economic outcome. The new R Recycling Module of AFIS 6 introduces the Recycling Opening Index (ROI), so spinners can optimize their circularity credentials. It was officially launched at ITM 2026 in Istanbul, Türkiye.

TOP