[pageLogInLogOut]

#Associations

Green Label becomes CLIMA!

During a press conference occurred at ITMA ASIA + CITME 2024, the world textile machinery exhibition, last October 15 in Shanghai, ACIMIT, the Association of Textile Machinery Manufacturers, unveiled CLIMA (Committed to Low Impact Machinery), the new green certification applied to Italian textile machinery. CLIMA will replace Green Label previous certification designed by ACIMIT back in 2011.
ACIMIT President Marco Salvade at the ITMA ASIA + CITME 2024 press conference © 2024 ACIMIT
ACIMIT President Marco Salvade at the ITMA ASIA + CITME 2024 press conference © 2024 ACIMIT


ACIMIT President Marco Salvade stated: "The focus of AC/MIT's Sustainable Technologies project has been the Green Label since its launch. This certification, which identifies the energy and environmental performance of each machine and makes it easily recognizable and understandable, has been a game changer for our industry, testifying to Italian manufacturers' commitment to sustainability. This commitment takes the form of savings in Carbon dioxide emissions as certified by a survey on the Green Labels produced from 2076 to 2023. The quantified avoided emissions are 7.2 million tons Carbon dioxide equivalent, corresponding to more than 227 thousand cars travelling for 35 thousand km over a year (on average)."

But now it is necessary to take note of the major changes imposed by international authorities, first and foremost those of the European Union. So in order to harmonize the previous ACIMIT green certification, i.e. Green Label, with the European regulations set forth in the new directive concerning "Empowering consumers for the green transition through better protection against unfair practices and through better information" CLIMA was launched.

ACIMIT, together with RINA, the international certifying body which is assisting ACIMIT in the project, successfully proposed to its member companies CLIMA the updated tool, that standardizes to its Statement of transparency and commitment to sustainability, guaranteeing transparency, exhaustiveness and truthful environmental claims referred to the self-assessment and the related digital tool for the production of Labels.





More News from Associazione Costruttori Italiani di Macchinario per l Industria Tessile (ACIMIT)

#Associations

Italian textile machinery orders show quarterly recovery in Q2 2026

In the period between April and June 2026, order intake for Italian textile machinery manufacturers showed mixed but encouraging signals for the second half of the year. The order index at constant prices stood at 46.6 points (taking 2021=100 as the base year), showing a slight decrease of 3% compared to the same quarter of 2025. This trend was largely due to the contraction recorded in the domestic market, which fell by 25% compared to the corresponding period of the previous year.

#Associations

Textile machinery: Italian technology charts the course for revival

Operating in a scenario characterized by geopolitical instability, slowing industrial investments, and new protectionist pressures. This is the main challenge for the Italian textile machinery industry that emerged during the General Assembly of ACIMIT (Association of Italian Textile Machinery Manufacturers), held today in Milan at the Shareholders’ Hall of Palazzo Edison.

#Associations

Bangladesh: Italian textile machinery mission stops in Dhaka and Chittagong

Technological upgrading and the transition toward higher value-added production are driving the new Italian industrial mission to Bangladesh. This year, the mission will split between the country’s two main manufacturing hubs, where Italian manufacturers will meet the leaders of the local textile supply chain in two strategic stages: July 7th in Dhaka and July 9th in Chittagong.

#Associations

Mongolia: Workshop on Italian textile technologies kicks off in Ulaanbaatar

The workshop dedicated to Italian textile technologies will kick off in Ulaanbaatar from 21 to 23 June 2026. Focused on the most advanced innovative solutions for the textile industry, the initiative will bring together 13 Italian textile machinery manufacturers, confirming the growing interest in strengthening industrial cooperation between the two countries and highlighting Mongolia’s strategic importance for Italian textile machinery producers.

More News on Associations

#Associations

Business situation weakens slightly, but the industry stays cautiously optimistic

The International Textile Manufacturers Federation (ITMF) has published the results of its 39th Global Textile Industry Survey (GTIS), conducted from 14 to 22 July 2026 among companies along the entire global textile value chain. Worldwide, 10% of participants rated their business situation as good, 53% as satisfactory and 37% as bad — a balance of -26pp, down from -17pp in May but still well above the 2023 lows. All regions are now in negative territory, from South Asia at -3pp to North & Central America at -58pp.

#Associations

IVGT membership: expertise that pays off

For energy-intensive textile companies, government compensation mechanisms are an important economic factor. The IVGT successfully supports its member companies in applying for state aid and thereby regularly contributes to significant financial relief.

#Associations

Consolidation amidst difficult market conditions

The International Textile Manufacturer Federation has published its International Textile Industry Statistics (ITIS) on productive capacity and raw materials consumption in the short-staple organized (spinning mill-) sector in virtually all textile-producing countries in the world.

#Recycling / Circular Economy

ReSpin joins TMAS to advance textile recycling technology

Swedish textile recycling company ReSpin has joined the Textile Machinery Association of Sweden (TMAS) as a new member. The company develops a patented mechanical recycling technology designed to transform textile waste into new fibres suitable for yarn production.

Latest News

#Man-Made Fibers

The LYCRA Company expands its co-creation vision through an immersive Lifestyle District at Intertextile Shanghai.

The LYCRA Company, a global leader in fiber and technology solutions for the apparel industry, is reimagining the trade show experience at Intertextile Shanghai Apparel Fabrics Autumn Edition, which opened today in China. Building on the success of last year's ALL IN concept, the company has expanded its co-creation vision into a 356-square-meter Lifestyle District featuring partners Jingzili New Material, JYT Textile, Lianxingfa Knitting, and Trend Textile. The district is part of a larger 895-square-meter pavilion showcasing a total of 19 co-exhibitors. Together, they demonstrate how innovations in fiber, fabric, and garments can be combined to create compelling solutions for both work and play.

#Natural Fibers

Plastic-free stretch technologies drive new direction for denim innovation

As the denim industry looks for ways to reduce its reliance on synthetic fibres, plastic-free stretch technologies are gaining momentum. Developments based on mechanical fabric construction and natural rubber are demonstrating that comfort and stretch can be achieved without conventional elastane, supporting both recyclability and circular product design.

#Man-Made Fibers

Bemberg and Anita Dongre collaborate once again to launch “BREATH” collection

BembergTM and Anita Dongre present BREATH, a ready to wear collection of 18 key silhouettes, shaped by a common belief that true beauty is inseparable from caring for the environment.

#Weaving

"Dynamic markets do not only create uncertainty – they also create opportunities."

Volatile markets, increasingly complex materials and growing demands for flexibility are changing the weaving industry. At the same time, new opportunities are emerging in technical textiles, filtration, composites and many other specialised applications. Since taking over as Head of DORNIER's Weaving Machines Product Line at the beginning of 2026, Yvonne Schuberth has been helping to shape this development. In this interview with TexData, she explains why process stability and customer proximity remain the foundation of innovation, how digitalisation is transforming weaving mills, and why she believes the future belongs to technologically demanding applications.

TOP